Rinsing The System Manually; Cappuccinatore; Rinsing The Cappuccinatore - Miele CM 5000 Operating Instructions Manual

^ Turn the rotary control until YES
appears in the display, if you want to
switch the automatic rinsing function
on.
or
^ Turn the rotary control until NO
appears in the display, if you want to
switch the automatic rinsing function
off.
^ Press the OK button.
The setting is now saved.

Rinsing the system manually

If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually if
you have used the machine.
^ Place a suitable container
underneath the coffee spouts.
^ In the main menu, press the OK
button for two seconds.
SETTINGS
r MAINTENANCE
^ Turn the rotary control until
MAINTENANCE appears in the
display. Press the OK button.
^ Turn the rotary control until RINSE
THE SYSTEM appears in the display.
Press the OK button.
^ Turn the rotary control until START
appears in the display.Press the OK
button.
The piping will now be rinsed through.
The water used for the rinsing process
will run out of the coffee spouts.

Cappuccinatore

The cappuccinatore can become
clogged with milk residues so it should
be rinsed through if more than an hour
has elapsed since a drink with milk has
been prepared.
If the cappuccinatore is used to heat or
froth milk, it is important to take it apart
and clean it once a day.
The cappuccinatore must be cleaned
by hand only using hot water and a little
washing-up liquid.

Rinsing the cappuccinatore

^ Place a container with some water
beside the coffee machine on the
right-hand side. Insert the milk tube
in the water.
^ Turn the cappuccinatore dial to the J
or z position.
^ Place a suitable container
underneath the cappuccinatore.
^ Press the * button.
s
The following will then appear in the
display:
^ Turn the valve to the I symbol.
Water will be drawn up through the milk
tube and the cappuccinatore.
^ Turn the valve to 0 when the
cappuccinatore has been thoroughly
rinsed through.
Cleaning and care
OPEN THE
VALVE
47