Introduction; Documentation Required; Tools And Equipment Required; Material - Gaggia Brera Service Manual

GAGGIA
1.1

Documentation required

The following documentation is needed for repair procedures:
• Instruction booklet for specific model
• Technical documentation for specific model (diagrams, exploded drawings)
1.2

Tools and equipment required

As well as the standard equipment, the following is required:
Qty. Description
1 Screwdriver
1 Pliers for Oetiker clamps
1 CC -A - Vdc tester
1 Digital thermometer
1 SSC (Saeco Service Center)
1.3

Material

Description
Thermal paste
Descaler
Grease solvent
Silicone grease
1.4

Safety warnings

We recommend you consult the technical manual of the machine before performing any mainte-
nance work.
Observe all applicable standards relating to the repair of electrical appliances.
Always disconnect the power plug from the mains before beginning repair work.
Simply turning off the main machine power switch is not an adequate safety
This domestic appliance is rated as insulation class I.
On completion of the repair work, insulation and dielectric rigidity tests must be performed.
Rev. 00 OCTOBER 2009
Notes
Torx T 10
Scale limit > 150°C
Programmer
Notes
Heating element > 200°C
Saeco Entkalker
Personal preference
Safe to use with food

01 INTRODUCTION

precaution.
01
Page / 04