Sony BVM-F170 Operation Manual page 89

STATUS (SDI Payload ID)
Option1/Input1
Payload ID B1 B2 B3 B4
Video Standard: HD-SDI
Sampling Structure: 4:2:2 Y/Cb/Cr
Bit Depth: 10bit
Picture Rate: 59.94
Scanning Method : Interlace/Interlace
Link Number: Single/Link_1
Current Status
Format: HD 422 YCbCr 10
I/PsF/P: Interlace
OptionX/InputX: Input port and input connector of the
displayed information
Standard or Option1 to 4 is displayed as an input port, and
Input1 or Input2 is displayed as an input connector.
Payload ID: Displays the 4-byte data for Payload ID of the
SMPTE-352M standard in hexadecimal in sequence of
Byte 1, Byte 2, Byte 3 and Byte 4.
When the Payload ID information is not set, only Current
Status is displayed, and "---" is displayed for other items.
When the following information is not decoded, Unknown
is displayed.
Video Standard: Decode display of Byte 1_Bit 6-0
Sampling Structure: Decode display of Byte 3_Bit 3-0
Bit Depth: Decode display of Byte 4_Bit 1-0
Picture Rate: Decode display of Byte 2_Bit 3-0
Scanning Method: Decode display of Byte 2_Bit 7 /
Byte 2_Bit 6
Link Number: Decode display of Byte 4_Bit 7-6
Current Status: Displays the current status of the monitor.
Format: Displayed as "Video Standard + Sampling
Structure + Bit Depth".
Video Standard: 3G / DL / HD / SD
Sampling Structure: 422 YCbCr / 444 YCbCr / 444
RGB
Bit Depth: 10 / 12
I/PsF/P: Interlace / PsF / Progressive
When the HDMI/DisplayPort signal is input
The same information as that of HDMI/DP Status in the
System Status menu is displayed.
HDMI signal
STATUS (HDMI)
Pixel Encoding: YCbCr 4:4:4
Color Depth: 12bit
Matrix: ITU-R BT.601
RGB Range: ---
v
3/3
V
v
3/3
V
DisplayPort signal
STATUS (DisplayPort)
Pixel Encoding: YCbCr 4:4:4
Color Depth: 10bit
Matrix: ITU-R BT.601
RGB Range: ---
Pixel Encoding: RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2
Color Depth: 8bit / 10bit / 12bit (HDMI signal), or
6bit/8bit/10bit/12bit (DisplayPort signal)
1)
Matrix : ITU-R BT.601 / ITU-R BT.709
2)
RGB Range : Limit / Full
1) It is displayed when HDMI/DisplayPort Auto is set to On in the Matrix
menu of the Channel Configuration menu.
2) It is displayed when HDMI/DisplayPort Auto is set to On in the RGB
Range menu of the Channel Configuration menu.
v
3/3
V
Displaying the Monitor Status Page
89