Sony BVM-F170 Operation Manual page 24

ENTER button
UP/DOWN buttons
1
Turn on the monitor with the MAIN POWER switch.
The Select Area screen appears.
Select Area
North America
Latin America
Africa
Australasia
Europe
Middle-East
Asia Except Japan
Japan
2
Press the UP or DOWN button of the controller to
select the area where you intend to use the monitor and
press the ENTER (Ent) button.
If you select either Latin America or Asia Except
Japan, one of the following screens appears.
If 2 Latin America is selected:
Select Area
Latin America
PAL & PAL-N Area
NTSC & PAL-M Area B
Select PAL & PAL-N or NTSC & PAL-M and press
the ENTER (Ent) button.
24
Settings
Ent button
1 North America
2 Latin America
3 Africa
B
B
B
B Australia/New Zealand
B
B
B
B
Europe/Russia
Middle East
4 Asia Except Japan
5 Japan
PAL&PAL-N area
B
NTSC&PAL-M area
If 4 Asia Except Japan is selected:
Select Area
Asia Except Japan
NTSC Area B
PAL Area B
Customers who will use this monitor in the shaded
areas shown in the map below should select NTSC
Area.
Other customers should select PAL Area.
Then press the ENTER (Ent) button.
3
Confirm the settings.
Select Area
XXXXXXXXXX
Color Temp: xx
Setup Level: xx
Component Level: xx
xx
Color Profile:
Cancel
Confirm
Cancel: Select to cancel the setting and return to the
Select Area screen.
Confirm: Select to save the setting and end selecting
the area.
See "Default value for each area" on page 23 on the
setting value.
NTSC area
PAL area