Operating Instructions LVC-A730NP (PAL, Normal) LVC-A730HP (PAL, High) LVC-A730NM (NTSC, Normal) LVC-A730HM (NTSC, High) Before installing and using the camera, please read these instructions throughly and retain them for later reference.
Page 2
Warning CAUTION To prevent fire or shock hazard, do not expose the unit to rain or moisture. RISK OF ELECTRIC SHOCK DO NOT OPEN To avoid electrical shock, do not open the cabinet Refer servicing to qualified personnel only. Wiring methods shall be in accordance with the National Electric Code, CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, ANSI/NFPA 70.
Contents Features...........................3 Cautions for Safe Operation .....................4 Operating Controls and Their Functions..................5 Power IN/CONTROL .......................6 External Key(A/D IN) .......................7 Setting The Menu .......................8-14 On-Screen Display ......................15-16 Specifications ........................17-18 FEATURES The power zoom color video camera is designed for use in monitoring system. High resolution and high sensitivity with a 1/4 inch CCD (Charge Coupled Device) ■...
Cautions for Safe Operation Power Supply Where it is exposed to rain ■ This camera must always be operated a 12V Where it is subject to strong vibration ■ DC UL Listed, Class 2 Power Supply only. Close to generators of powerful ■...
Operating Controls and Their Functions Control names and Functions 1. Tripod adaptor This adaptor can also be attached on the bottom of the camera. 2. Lens mount cap 3. When push the TELE KEY, picture is telephoto 4. When push the WIDE KEY, picture is wide angle 5.
POWER IN/CONTROL You can adjust focus and zoom by a pin terminal on the back side of the camera. Description Color * PIN NO. Zoom (+: TELE, - : WIDE) Green Focus (+ : NEAR, - : FAR) White External Key input (A/D IN) Brown(Blue) Common terminal(ZOOM, FOCUS) Yelllow...
External Key (A/D IN) Schemetic diagram of wired remote-control ● POWER ON/OFF S-VIDEO TELE WIDE ● MENU ON/OFF ● F.NEAR F.FAR MENU TELE ● WIDE POWER IN ● Digital Effect(Wide, Art, CLASS 2 ONLY Mirror, Nega, mono, Mosaic) VIDEO CONTROL ●...
Setting The Menu • The On Screen Display menu can be used by MENU, MENU 1 TELE, WIDE, F.NEAR(F(+)), F.FAR(F(-)) Key. INITIAL SET BACKLIGHT Menu 1 COLOR NEGATIVE FOCUS PUSH AUTO 1. INITIAL SET FLICKERLESS Set the initial mode ON, the changed data are renewed. WBC MODE AUTO 2.
Page 9
4. NEGATIVE MENU 1 Use for changing NEGATIVE and POSITIVE mode. INITIAL SET BACKLIGHT • ON: NEGATIVE mode, • OFF: POSITIVE mode COLOR NEGATIVE 5. FOCUS FOCUS PUSH AUTO AUTO/MAN: Set the focus mode to Auto or Manual. FLICKERLESS PUSH AUTO: Set the focus mode to Push Auto mode. WBC MODE AUTO 6.
Page 10
7. WBC MODE • AUTO: WB Range 2800°K ~ 8000°K • SPECIAL(SWB): Under the special WB condition (Differ from curve of the control color temperature), Adjust Red and Blue to perform a desired Auto White Balance. WBC MODE SPECIAL WBC MODE SPECIAL RED ADJUST RED ADJUST...
Page 11
• MANUAL( ): Hue control adjustment is available manually. Adjust MWB CONTROL to a desired value. WBC MODE MANUAL WBC MODE MANUAL MWB CONTROL MWB CONTROL MWB CONTROL Set the WB mode is MANUAL mode Adjust the MWB CONTROL The whole MENU is displayed using using F(+) or F (-) key code.
Page 12
Menu 2 MENU 2 8. CAMERA ID CAMERA ID To connect a large number of camera, It can be assigned to SHARPNESS identification number to each camera control easily (OFF, 1~255 : BRIGHTNESS total numbers of ID are 256). ZOOM START CAUTION: To transfer ID code of camera , set the ID number of ZOOM END x128...
Page 13
14. AE MODE In the situation is unadjustable exposure, AE mode support to make a fit exposure. • AUTO: Use to compensate the exposure automatically. • SHUTTER: Use to change the Shutter Speed control. In this time, AE mode act automatically (8 steps control is available).
Page 14
• MANUAL: Use to set the shutter speed, IRIS and AGC manually. AE MODE MANUAL AE MODE MANUAL SHUTTER NORMAL SHUTTER NORMAL SHUTTER NORMAL IRIS ADJUST IRIS ADJUST IRIS ADJUST AGC ADJUST AGC ADJUST Set the AE mode is MANUAL Adjust the SHUTTER The whole MENU is Adjust the IRIS ADJUST to...
On-Screen Display Some of these functions will FUNCTION OSD Format Description be displayed every time the 1 Focus Mode Non display Focus Auto Mode camera is operated and then ☞ Focus Manual mode disappeared after 5 seconds. 2 Back Light Non display Back Light OFF Back Light ON...
Page 16
On-Screen Display FUNCTION OSD Format Description 6 WBC Mode Non display White Balance AUTO Special Auto White Balance; Adjustment Mode according to change of external illuminant. RED ADJUST and BLUE ADJUST (0~255) are available. After changing R/B value, the maintenance mode is “AUTO”. WB Preset for INDOOR (3200°K) Wb Preset for OUTDOOR (5100°K) Manual WB Adjustment;...
Specifications Image device 1/4" interline transfer CCD NTSC, High resolution : 380,000 NTSC, Normal resolution : 250,000 PAL, High resolution : 440,000 PAL, Normal resolution : 290,000 Sync system Internal sync Horizontal resolution Approx.450 Line (NTSC, High resolution) 320 Line (NTSC, Normal resolution) 450 Line (PAL, High resolution) 320 Line (PAL, Normal resolution) (at center of screen)
Page 18
Specifications Power requirement 12V DC UL Listed, Class 2 Power Supply only Video output BNC-type, S-Video-type (1.0Vp-p, 75ohms) Power consumption Max 4.7w operating temperature C ~ 50 Operating Humidity 0%~80% Storage temperature C to+60 Dimensions 59.4mm(W) x 61.2mm(H) x 95mm(D) Specifications are subject to change without notice.
Page 25
(A/D IN) 线控示意图 ● 开机/关机 S-VIDEO ● 菜单开/关 TELE WIDE ● 远景 F.NEAR F.FAR MENU ● 广角 ● 数字效果 广角 艺术 镜 POWER IN CLASS 2 面 负像 单色 马赛克 ONLY VIDEO ● 拉近 手动拉近焦距 CONTROL ● 拉远 手动拉远焦距 ● 自动/手动或强制自动...
Page 26
• 您可以通过 MENU TELE WIDE F.NEAR(F(+)) MENU 1 F.FAR(F(-)) 键来使用屏幕显示菜单 INITIAL SET BACKLIGHT COLOR MENU 1 NEGATIVE FOCUS PUSH AUTO 1. INITIAL SET FLICKERLESS 将初始模式设为 ON 则更新修改的数据 WBC MODE AUTO 2. BACKLIGHT 当中心物体后面的光线过强时 您需要避免中心物体过暗 将 BACKLIGHT 设为 ON 这样中心物体会变亮 3. COLOR 用来将图像改变为彩色和单色...
Page 27
4. NEGATIVE MENU 1 INITIAL SET 用于改变 NEGATIVE 负像 和 POSITIVE 正像 模 BACKLIGHT 式 COLOR • ON 开 NEGATIVE 模式, • OFF: POSITIVE 模式 NEGATIVE FOCUS PUSH AUTO 5. FOCUS FLICKERLESS WBC MODE AUTO AUTO/MAN 自动/手动 将对焦模式设为自动或手动 PUSH AUTO 强制自动 将对焦模式设为强制自动模...
Page 28
7. WBC MODE 白平衡范围 2800°K ~ 8000°K • AUTO 在特殊的白平衡条件 不同于控制色温曲线 下 调整 • SPECIAL(SWB) 红色和蓝色以达到所需的自动白平衡 WBC MODE SPECIAL WBC MODE SPECIAL RED ADJUST RED ADJUST RED ADJUST BLUE ADJUST 0 BLUE ADJUST 253 BLUE ADJUST 10 使用 F(+) 或 F (-) 键将 WB 使用...
Page 29
):可以进行手动色调控制 将 MWB CONTROL 手动白平衡控制 • MANUAL( 调整到所需的值 WBC MODE MANUAL WBC MODE MANUAL MWB CONTROL MWB CONTROL MWB CONTROL 使用 F(+) 或 F (-) 键将 WB 模式设为 将 MWB CONTROL 手动 使用 TELE 或 WIDE 键显示整个 MANUAL 出现 MWB CONTROL 白平衡控制...
Page 30
MENU 2 MENU 2 8. CAMERA ID CAMERA ID 当连接多台摄像机时 可以为每台摄像机指定一个识别码 这样就 SHARPNESS 可以更容易的对每台摄像机进行控制 OFF 1~255 摄像机总 ID BRIGHTNESS 为 256 ZOOM START : 要设置摄像机 ID 先设定第一台摄像机的 ID 随后会连续显 ZOOM END x128 示 ID 编号 FOCUS FROM AE MODE AUTO 9.