Table of Contents
Advertisement
Cautions for Safe Operation
Power Supply
This camera must always be operated a 12V
DC UL Listed, Class 2 Power Supply only.
Handling of the unit
Be careful not to spill water or other liquids on
the unit, or to get combustible or metallic
material inside the body. If used with foreign
matter inside, the camera is liable to fail, or to
be a cause of fire or electric shock.
Operating and storage location
Avoid viewing a very bright object (such as light
fittings) for an extended period. Avoid operating
or storing the unit in the following locations.
Extremely hot or cold places (operating
■
o
o
temperature -10
C~50
C, however, we
recommend that the unit be used within a
o
o
temperature range of 0
C~45
C)
Damp or dust place
■
4
Where it is exposed to rain
■
Where it is subject to strong vibration
■
Close to generators of powerful
■
electromagnetic radiation such as radio or
TV transmitters.
Care of the unit
Remove dust or dirt on the surface of the
■
lens with a blower.
Use a dry soft cloth to clean the body. If it
■
is very dirty, use a cloth dampened with a
small quantity of neutral detergent, then
wipe dry.
Avoid the use of volatile solvents such as
■
thinners, alcohol, benzene, and
insecticides. They may damage the surface
finish and/or impair the operation of the
camera.
Advertisement
Table of Contents
