1. Manuals
  2. Brands
  3. i3 International Manuals
  4. Security Camera
  5. i3F416U
  6. User manual

i3 International i3F416U User Manual

Wide dynamic range dome
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CONTENTS
WARNING:
Before attempting to connect or operate this product, read these instructions carefully.
Save this manual for future use.
To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the camera.
Refer servicing to qualified personnel only.
i3F416U (with UTP Balun)
Wide Dynamic Range Dome User Guide
1
2
6
8
11
13
19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the i3F416U and is the answer not in the manual?

Questions and answers

Related Manuals for i3 International i3F416U

Summary of Contents for i3 International i3F416U

  • Page 1: Table Of Contents

    (with UTP Balun) Wide Dynamic Range Dome User Guide CONTENTS PRECAUTIONS NOTES OF USE CEILING MOUNT I NSTALLATION WALL MOUNT I NSTALLATION OSD MENU OSD SETTINGS SPECIFICATIONS WARNING: Before attempting to connect or operate this product, read these instructions carefully.

  • Page 3: Precautions

    PRECAUTIONS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Notes Of Use

    NOTES OF USE Features • Rugged, Vandal-resistant, IP67 • Wide dynamic range color camera with auto iris, 2.8-10mm varifocal lens • Available with wide dynamic range(WDR) technology (102dB typical / 120dB max) • 1/3” Pixim Orca sensor • Noise ratio > 50dB •...

  • Page 5: Power Supply

    NOTES OF USE Power Supply You can use either AC 24V or DC 12V power input. The camera auto- matically detects the power. When connecting the transformer, be sure to connect each lead to the appropriate terminal. Incorrect connection may cause malfunction and/or damage to the video camera. Operating or storage location Avoid shooting very bright objects (such as light fittings) for an extended period.

  • Page 6: Location And Function Of Parts

    NOTES OF USE Using the Camera Outdoors To prevent moisture from getting inside the casing, use sealant (e.g., silicon sealant) to seal the following areas: • The holes under the unit casing that is attached to a ceiling or wall. •...
  • Page 7 NOTES OF USE...

  • Page 8: Ceiling Mount Installation

    CEILING MOUNT INSTALLATION Step 1: Adhere the guide pattern to the installation surface. Drill one big and three small holes, using the template as a guide. Step 2: Install the camera onto the ceiling and fasten securely using the screws provided. Step 3: Remove the mask.
  • Page 9 CEILING MOUNT INSTALLATION Step 4: Loosen the screw on the main bracket, adjust the tilt angle, then tighten the screw to maintain setting. Step 5: Adjust the camera zoom to a suitable position. Step 6: Return mask to its original position on the camera.

  • Page 10: Wall Mount Installation

    WALL MOUNT INSTALLATION Step 1: Adhere the guide pattern to the installation surface. Drill four small holes for the plastic drywall anchors. Step 2: Fasten the bottom casing to the wall by securely tightening the four screws provided. Step 3: Install the camera onto the bottom casing and secure tightly with screws.
  • Page 11 WALL MOUNT INSTALLATION Step 4: Remove the mask and rotate the main bracket to adjust the pan angle. Step 5: Loosen the screw on the main bracket, adjust the tilt angle, then tighten the screw to maintain setting. Step 6: Adjust the camera zoom to a suitable position.
  • Page 12 WALL MOUNT INSTALLATION Step 6: Return mask to its original position on the camera. Step 7: Screw the top cover to the camera securely.

  • Page 13: Osd Menu

    OSD MENU NORMAL / INDOOR / OUTDOOR / FLOUR / 1. ENVIRONMENT CUSTOM WD LEVEL 1~10 2. CAMERA SETUP AE PREFs HIGHLIGHT / SHADOWS LOW / MED / HIGH SENS UP OFF / X2 / X4 / X8 / X16 / X32 OFF / CENTER / DOOR UP / MENU DOOR DOWN / HALF UP /...
  • Page 14 OSD MENU 1~12 4. OPTION ZOOM ZOOM -5~5 TILT -5~5 FLIP OFF / HORIZ / VERT / BOTH MASK 1 OFF / ON PRIVACY MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON...

  • Page 15: Osd Settings

    OSD SETTINGS Press the ENTER key to open the menu. A selected menu item will be shaded and blinking. NOTE: If no settings are made, the menu will disappear after 30 seconds. MAIN – ENVIRONMENT Select ENVIRONMENT function This camera provides 5 preset environment settings. These are NORMAL, INDOOR, OUTDOOR, FLUOR and CUSTOM.
  • Page 16 OSD SETTINGS 2.4 MAIN – CAMERA SETUP – SENS UP Setting of SENS UP (OFF, X2, X4, X8, X16, X32). This setting allows camera to adjust its shutter speed according to the lighting condition of the environment. Move the cursor to SENS UP submenu. Use the LEFT/RIGHT functions of the joystick to select a SENS UP setting to the desired mode.
  • Page 17 OSD SETTINGS 2.10 MAIN – CAMERA SETUP – GAMMA 0.45 or 1.0 can be selected. Move the cursor to the position of GAMMA to set the value. Generally 0.45 is the default value for CCTV CRT monitors. For image processing purposes 1.0 can be selected. 2.11 MAIN –...
  • Page 18 OSD SETTINGS 3.1.3 MAIN – D/N MODE – AUTO – NIGHT GAIN BOOST Setting NIGHT GAIN BOOST function. Move the cursor to the position of NIGHT GAIN BOOST. Use the LEFT/RIGHT functions of the joystick to select ON or OFF. This function is only effective when D/N mode is set to AUTO.
  • Page 19 OSD SETTINGS 4.3.1 MAIN – OPTION – PRIVACY – MASK 1~8 Use the UP/DOWN functions of the joystick to move the cursor to the desired position. Use the LEFT/RIGHT functions of the joystick to select MASK ON or OFF status. When MASK is in ON status, press ENTER to turn on the privacy zone setting mode.
  • Page 20 OSD SETTINGS 4.7 MAIN – OPTION – UTP The camera can be configured to provide video for both coax and unshielded twisted pair (UTP) cables. For usage with twisted pair, use the LEFT/RIGHT functions of the joystick to select the TP transmitter amplification: OFF 0, 1.5, 3, 4.5, 6 dB.

  • Page 21: Specifications

    SPECIFICATIONS Camera Signal system NTSC Scanning system 2:1 Interlace Sync system Internal / Line lock Scanning frequency (H) 15.734 KHz 15.625 KHz Scanning frequency (V) 59.94 Hz 50 Hz Day & Night (IICR) Easy D/N ; Auto Imaging area 4.9 mm x 3.7 mm Image sensor Pixim Orca Sensor with Digital Pixel System ®...
  • Page 22 i³ INTERNATIONAL INC. 1.866.840.0004 U.S.A. 440 Lawrence Bell Drive, Canada 780 Birchmount Road, www.i3international.com Suite 16, Williamsville Unit 16, Scarborough, NY, 14221 ON, M1K 5H4...

Table of Contents