Jøtul F 600 Installation And Operating Instructions Manual page 2

USA/cAnAdA
Installation and Operating Instructions for the USA
Installation et fonctionnement pour Canada
Safety notice: If this solid fuel room heater is not properly installed, a house fire may result. For your
safety, follow the installation directions. Contact local building or fire officials about restrictions and
installation inspection requirements in your area. Kindly save these instructions for future reference.
Avis de sécurité: Une installation non appropriée de ce poêle de chauffage risque de provoquer un
incendie. Assurez votre sécurité en respectant les directives d'installation suivantes. Consultez les
autorités locales du bâtiment ou de la prévention des incendies au sujet des restrictions et exigences
relatives aux inspections d'installations dans votre région.
Tested and listed by ITS, Intertek Testing Services, Middleton, Wisconsin.
Tested to U.S. Standards: ANSI/UL 1482 & 737, Canadian Standards: CAN/ULC-S627-M93
Standards:
The Jøtul F 600 woodstove has been tested and listed to;
U.S. Standards: ANSI/UL 737 and ANSI/UL 1482.
Canadian Standards: CAN/ULC-S627-M93
Tests performed by:
ITS Intertek Testing Services, Middleton, WI
Manufactured by:
Jøtul AS, P.O. Box 1411, N-1602 Fredrikstad, Norway
Distributed by:
Jøtul North America, 55 Hutcherson Drive, Gorham, Maine 04038,
USA.
This heater meets the U.S. Environment Protection Agency's
Emissions limits for wood heaters manufactured and sold after
July 1, 1990.
Under specific test conditions, this heater has shown heat output
at rates ranging from 13,500 to 45,900 BTU's per hour.
The Jøtul F 600 woodstove is only listed to burn wood. Do not
burn any other fuels.
When installing, operating and maintaining your Jøtul F 600
woodstove, follow the guidelines presented in these instructions,
and make them available to anyone using or servicing the
stove.
Jøtul North America Inc.
55 Hutcherson Drive,
Gorham, Maine 04038,
USA
Jøtul pursues a policy of continual product development. Products as supplied may therefore differ in specification, colour, or type of
accessories, from those illustrated or otherwise described in publications and brochures.
2
A number of areas require a building permit to install a solid fuel
burning appliance.
In the U.S., the National Fire Protection Association's Code, NFPA
211, Standards for Chimneys, Fireplaces, Vents and Solid Fuel
Burning Appliances, or similar regulations, may apply to the
installation of a solid fuel burning appliance in your area.
In Canada, the guideline is established by the CSA Standard,
CAN/CSA-B365-M93, Installation Code for Solid-Fuel-Burning
Appliances and Equipment.
Always consult your local building inspector or authority having
jurisdiction to determine what regulations apply in your area.