Heated Seats - BMW 2007X5 3.0si Owner's Handbook Manual

The belt reminder is issued if the driver's seat
belt has not yet been fastened. On certain
national-market versions, the belt reminder is
also activated at road speeds above approx.
8 km/h, approx. 5 mph, if the front passenger's
seat belt is not fastened, if objects are placed on
the front passenger seat, or if the driver or front
passenger unfasten their seat belts.
Opening
1. Hold onto the belt.
2. Press the red button on the belt buckle.
3. Guide the belt back up to the reel.
The upper belt anchorage is suitable for adults
of any stature as long as they are sitting cor-
rectly, see page 39.
The two seat belt buckles integrated into the
rear bench seat are intended for the left and
right seat occupants. The buckle marked
CENTER is only to be used by a person occupy-
ing the centre rear seat.
Damaged seat belts
In the event of stress due to an accident
or damage: replace the belt system,
including the seat-belt tensioner and any child
restraint systems and have the belt anchorage
tested. Have this work performed only by BMW
Service or by a workshop that operates to BMW
specifications and has suitably trained person-
nel, otherwise the correct functioning of this
safety equipment is not
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG
guaranteed.<

Heated seats*

Front
Press once per temperature stage. The highest
temperature is indicated by three LEDs.
To switch off: press and hold down the button.
Temperature distribution*
The temperature distribution between the seat
cushion and seat back can be varied.
iDrive, principle, see page 14.
1. Call up the start menu.
2. Move the controller to the left to call up
"Climate".
3. Select "Seat-heating distribution" and
press the controller.
4. Move the controller to the left or right to
select "Driver" or "Passenger".
5. Turn the controller. The setting is adopted;
you can now change to another field.
45