Do you have a question about the 2007 3 Series and is the answer not in the manual?
Questions and answers
Abdool Nizam Bolaky
February 27, 2025
how to put on the rear wiper on bmw series 1 2007 ?
2 comments:
Mr. Anderson
February 27, 2025
To install the rear wiper on a 2007 BMW 3 Series (Sports Wagon):
1. Fold the wiper blade upwards. 2. Remove the wiper blade in the direction of the windshield. 3. Install the new wiper blade by attaching it in the reverse order. 4. Ensure the wiper arm is against the windshield before closing the engine compartment to avoid damage.
This answer is automatically generated
Abdool Nizam Bolaky
February 27, 2025
@Mr. Anderson
Abdool Nizam Bolaky
February 27, 2025
how to operate the rear wiper on bmw series 1 2007 ?
1 comments:
Mr. Anderson
May 14, 2025
To operate the rear wiper on a 2007 BMW 3 Series Sports Wagon:
1. Press the rear wiper button (arrow 3). The LED in the button lights up. 2. The wiper operates intermittently. If reverse gear is engaged, it switches to continuous operation. 3. To clean the rear window, use the cleaning function. 4. To deactivate the wiper, press the button again (arrow 3). The LED goes out. 5. Make sure the lever is not in position 1 before switching on the ignition; otherwise, the wiper will not move. 6. To switch on the wiper, move the lever to its home position and reselect the desired setting.
Need help?
Do you have a question about the 2007 3 Series and is the answer not in the manual?
Questions and answers
how to put on the rear wiper on bmw series 1 2007 ?
To install the rear wiper on a 2007 BMW 3 Series (Sports Wagon):
1. Fold the wiper blade upwards.
2. Remove the wiper blade in the direction of the windshield.
3. Install the new wiper blade by attaching it in the reverse order.
4. Ensure the wiper arm is against the windshield before closing the engine compartment to avoid damage.
This answer is automatically generated
@Mr. Anderson
how to operate the rear wiper on bmw series 1 2007 ?
To operate the rear wiper on a 2007 BMW 3 Series Sports Wagon:
1. Press the rear wiper button (arrow 3). The LED in the button lights up.
2. The wiper operates intermittently. If reverse gear is engaged, it switches to continuous operation.
3. To clean the rear window, use the cleaning function.
4. To deactivate the wiper, press the button again (arrow 3). The LED goes out.
5. Make sure the lever is not in position 1 before switching on the ignition; otherwise, the wiper will not move.
6. To switch on the wiper, move the lever to its home position and reselect the desired setting.
This answer is automatically generated