BMW 2007X5 3.0si Owner's Handbook Manual page 179

The station is now memorised.
The stations are saved for the remote control
currently in use.
Changing memory location
1. Select "Memorised stations" and press the
controller.
2. Select the desired station and press the
controller.
3. Select "Save" and press the controller.
4. Turn the controller until the desired mem-
ory location is selected.
5. Press the controller.
The station is now memorised.
Selecting a frequency band*
Some digital stations are transmitted regionally
while others are transmitted nationally.
For more information on frequency bands, con-
tact BMW Service.
1. Press the button.
The start menu is called up.
2. Press the controller to call up the
3. Turn the controller until "Settings" is
selected and press the controller.
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG
4. Select "Tone" and press the controller.
5. If necessary, move the highlighted marker
to the uppermost field. Turn the controller
until "DAB" is selected and press the con-
troller.
6. Select "Frequency selection" and press the
controller.
7. To select a frequency band:
> "Band III + L" for regional and national
stations
> "Band L" for regional stations
> "Band III" for national stations
8. Press the controller.
The setting is saved for the remote control cur-
rently in use.
menu.
Automatic switchover
You can select whether the set switches over
automatically to the station's analogue fre-
quency if digital reception is not possible.
1. Press the
The start menu is called up.
2. Press the controller to call up the
button.
menu.
177