BMW 2007X5 3.0si Owner's Handbook Manual page 112

From radio readiness, you can adjust the inside
temperature, air volume and air distribution.
The auxiliary heater continues to run for a short
time after it has been switched off.
The symbol on the automatic air conditioning
display goes out.
Never run the auxiliary heater in enclosed
spaces, as inhaling the harmful exhaust
gas from the engine can lead to loss of con-
sciousness with fatal consequences. The
exhaust gas contains carbon monoxide, which
is colourless and odourless, but highly toxic.
Switch off the auxiliary heater before refuelling
the car. Drive through water only to a max.
depth of 25 cm, approx. 10 in, and no faster
than walking pace at that depth, otherwise the
auxiliary heater may be
The auxiliary heater will not come on or
will switch itself off if the range on the fuel
remaining in the tank is less than approx. 50 km,
approx. 30 miles.<
Switching on and off directly
iDrive, principle, see page 14.
1. Call up the start menu.
2. Move the controller to the left to call up
"Climate".
3. Select "Independent mode" and press the
controller.
4. Select "Direct operation" and press the
controller.
5. Select "Independent heater" or "Independ-
ent ventilation" and press the controller.
The independent ventilation system/auxil-
iary heater is on.
110
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG
damaged.<
The symbol on the automatic air conditioning
display flashes.
Preselecting switch-on times
iDrive, principle, see page 14.
1. Call up the start menu.
2. Move the controller to the left to call up
"Climate".
3. Select "Independent mode" and press the
controller.
4. Select "Switch-on times" and press the
controller.
5. Move the controller to the left or right to
select "Timer 1" or "Timer 2".
6. Select the time and press the controller.
The first part of the setting is selected.
7. Turn the controller to make the adjustment.
8. Press the controller to adopt the setting.
The next part of the time setting is selected.
9. Complete the setting. Once the setting has
been completed, the time is memorised.