Radio Data System Rds - BMW 2007X5 3.0si Owner's Handbook Manual

Via favourites/programmable memory
buttons
You can also store a station under the favour-
ites/programmable memory buttons, see also
page 19.
1. Select the station.
2. Press the desired button
longer.
Changing memory location
1. Select "Memorised stations" and press the
controller.
2. Select the desired station.
"Set" is selected.
3. Press the controller.
Further menu items are displayed.
4. Select "Save" and press the controller.
5. Turn the controller until the desired mem-
ory location is selected.
The number of the memory location is dis-
played next to the name or frequency of the
station.
6. Press the controller.
The station is now memorised.

Radio Data System RDS

Additional information is broadcast via RDS on
the VHF/FM waveband. RDS stations therefore
offer the following features:
> Where a radio station is broadcast on sev-
eral frequencies, the set automatically
switches to whichever frequency offers the
best reception.
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG
> Where reception conditions are good, the
names of stations are displayed on the con-
trol display. Where reception is poor or in
the event of interference, it may take some
time before the station names will appear in
the display.
... for
Switching RDS on/off*
1. Select "FM" and press the controller.
"Set" is selected.
2. Press the controller.
Further menu items are displayed.
3. Select "RDS" and press the controller.
RDS is switched on.
The setting is saved for the remote control cur-
rently in use.
Sorting stations
automatically*
For the selection criterion "All stations", you
can program whether the most frequently used
stations are displayed first.
171