BODY STRUCTURE [PANEL REPLACEMENT]
FRONT SIDE FRAME (PARTIAL CUTTING) REMOVAL[PANEL REPLACEMENT]
1. To facilitate rough cutting of the outer, drill the 3 weld locations indicated by (A) and bend the wheel apron panel
(front) upward.
2. Rough cut at the locations shown in the figure to remove damaged parts.
CUT-AND-JOINT LOCATION FOR THE INNER
End Of Sie
09-80B–10
INNER
185mm
{7.28in}
(A) 3
150mm
{5.90in}
ROUGH CUT LOCATION
CUT-AND-JOINT LOCATION FOR THE OUTER
ROUGH CUT LOCATION
OUTER
id098008742100
BUE0980B012