Side Sill Panel Installation - Ford 2006 Escape J87R Bodyshop Manual

BODY STRUCTURE [PANEL REPLACEMENT]
SIDE SILL PANEL INSTALLATION[PANEL REPLACEMENT]
1. When joining the new and old parts, temporarily install and fit the new part in position, measure each
dimension according to the body dimension, then adjust the position to align it to the standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. Plug the 38 weld locations indicated by (A) during installation of the side sill reinforcement.
4. After temporarily installing new parts, make sure the related parts fit properly.
CUT-AND-JOIN
LOCATION
180mm
{7.08in}
CUT-AND-JOIN
LOCATION
50mm
{1.96in}
End Of Sie
BM: REAR FENDER PANEL
70mm
{2.75in}
17
2
3
30
BOTTOM SIDE 3
SIDE SILL
REINFORCEMENT
(A) 10
(A) 3
(A) 3
(A) 14
CUT-AND-JOIN
LOCATION
20
230mm
{9.05in}
7
(A) 8
09-80B–21
id098008615200
80B
BUE0980B025