Table of Contents
Advertisement
Symbols of Body Dimensions
• The following 8 symbols are used to indicate the standard points.
SYMBOL
MEANING
Center of circular hole
Center elliptical hole
Notch
Panel seam, bead, etc.
End Of Sie
SERVICE PRECAUTIONS
Arrangement of Workshop
• Arrangement of the workshop is important for safe and efficient work.
Safety Precautions
• Protective head covering and safety shoes should
always be worn. Depending upon the nature of
the work, gloves, safety glasses, ear protectors,
face shield, etc., should also be used.
Vehicle Protection
• Use seat covers and floor covers.
• Use heat-resistant protective covers to protect glass areas and seats from heat or sparks during welding.
• Protect items such as moldings, garnishes, and
ornaments with tape when welding.
Remove Dangerous Articles
• Remove the fuel tank before using an open flame
in that area. Plug connection piping to prevent
fuel leakage.
00-00–6
GENERAL INFORMATION
SYMBOL
(arrow only)
Welding
glasses
Dust mask Safety glasses
MEANING
Bolt tip
Center of rectangular-shaped hole
Edge of rectangular-shaped hole
Cotton
Ear
Weldlng
protectors
gloves
gloves
Safety shoes
Face shield
acxuub00000037
id000000600200
acxuub00000038
acxuub00000063
acxuub00000064
Advertisement
Chapters
Table of Contents
