BODY STRUCTURE [PANEL REPLACEMENT]
REAR FENDER PANEL INSTALLATION[PANEL REPLACEMENT]
1. When joining the new and old parts, temporarily install and fit the new part in position, measure each
dimension according to the body dimension, then adjust the position to align it to the standard dimensions.
2. Drill holes for plug welds before installing new parts.
3. Before installing new parts, apply spot weld sealer to the wheel arch line.
4. After temporarily installing new parts, make sure the related parts fit properly.
185mm
{7.28in}
CUT-AND-JOIN LOCATION
24
CUT-AND-JOIN LOCATION
8
30mm
{1.18in}
End Of Sie
BM: REAR END PANEL
CUT-AND-JOIN LOCATION
80mm {3.14in}
4
4
7
25
BOTTOM SIDE 1
8
200mm
{7.87in}
17
4
3
09-80B–23
id098008745000
80B
BUE0980B023