Subaru H001SVA800 Installation Manual page 4

7. Remove the Driver's Side Knee Airbag carefully .
• Remove 2 Nuts.
• Hold Airbag as to prevent tension on the Harness.
• Disengage the Yellow Connector Lock by using a
pick tool to lift upward.
• Use a Panel removal tool to carefully lift upward to
unplug the Airbag Connector.
• Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.
8. Remove the Center Cluster Panel.
• Disengage 13 Clips.
• Disconnect Vehicle connectors.
• Disengage and remove cover from the bottom first
and work upward.
9. Remove the Audio Unit.
• Remove 6 Screws.
• Disconnect Vehicle connectors.
10. Remove the Passenger's Side Dash Cover.
• Disengage 4 Clips.
• Disengage and remove cover from the bottom first
and work upward.
- 4 -