Advertisement
Available languages
Available languages
Check C-1
Yes
Yes
Press the Unlock button, then the Lock button on the Car's remote. Do the doors lock and hazard lights work properly?
Yes
Do Smart Engine Start again. Does pressing down lock button three times work as the manual describe?
Yes
Are connectors A, F, H, I on the wiring diagram connected? Are the connectors plugged in properly?
Yes
Please check +B, GND, IG using the wiring harness checks (page 37). Was problem solved?
The SES ECU may be out of order, replace and register again. If registration still failed, replace the wiring harness.
Is the battery terminal connected?
Is the "ENGINE START STOP" Button (ACC and IG) OFF?
Please perform an SES registration on page 20.
No
No
Press the "ENGINE START STOP" Button to turn it OFF.
See car's repair manual. Check the remote's battery might
have run out.
Review how to operate Smart Engine Start and try again.
Perform Operation Confirmation again on page 22
Troubleshooting completed.
- 29 -
No
Connect it.
No
No
No
Yes
No
Connect it.
Yes
Advertisement
