Subaru H001SVA800 Installation Manual page 13

5. Attach 1 Foam Tape to the Hood Switch as shown.
6. Attach the Hood Switch to the Hood Switch Holder
with the Screw.
• Make sure the Guide Pin is seated correctly and verify
that the Screw is tightened securely.
• When Attaching the Hood Switch Holder to the Hood
Switch, Do not hold the NG Area of the Hood Switch.
• Tighten the Screw to 2.6 N·m (0.27 kgf·m, 1.92 ft-lb)
OK Area
- 13 -
NG Area