Msi Plessey Check Digits; Transmit Msi Plessey Check Digit - Symbol MINISCAN MSXX04 Integration Manual

MSI Plessey Check Digits

Parameter # 32h
These check digits at the end of the bar code verify the integrity of the data. At least one check digit is required.
Check digits are not automatically transmitted with the data.
If two check digits is selected, also select an

Transmit MSI Plessey Check Digit

Parameter # 2Eh
Scan this symbol to transmit the check digit with the data.
Scan this symbol to transmit data without the check digit.
*One MSI Plessey Check Digit
00h)
MSI Plessey Check Digit Algorithm on page
Two MSI Plessey Check Digit
(01h)
Transmit MSI Plessey Check Digit
(Enable)
(01h)
*Do Not Transmit MSI Plessey Check Digit
(Disable)
(00h)
Parameter Menus 10 - 75
10-76.