About This Guide; Introduction; Chapter Descriptions - Symbol MINISCAN MSXX04 Integration Manual

About This Guide

Introduction

The Symbol MiniScan MSXX04 Series Integration Guide provides general instructions for mounting, setting up,
and programming the following Symbol MiniScan models:
•
MS954
•
MS1204FZY
•
MS2204
•
MS2204VHD
•
MS3204.
NOTE It is recommended that an opto-mechanical engineer perform an opto-mechanical analysis prior to
integration.

Chapter Descriptions

Topics covered in this guide are as follows:
•
Chapter 1, Getting
block diagram of the scanner.
•
Chapter 2, Installation, describes how to mount and install the MiniScan scanner.
•
Chapter 3, Scanning, provides information on scan patterns, scanning, triggering options, and beeper and
LED definitions.
•
Chapter 4, Symbol MS1204FZY
Symbol MS1204FZY scanner.
•
Chapter 5, Symbol MS2204
MS2204 scanner.
•
Chapter 6, Symbol MS2204VHD
Symbol MS2204VHD scanner.
Started, provides an overview of the MiniScan scanners and features, and provides a
Specifications, provides the technical and scanning specifications for the
Specifications, provides the technical and scanning specifications for the Symbol
Specifications, provides the technical and scanning specifications for the