Settings - Honeywell T8611G Chronotherm IV Deluxe Manual

T8611G CHRONOTHERM
Mounting Thermostat Wallplate
The thermostat mounts on the wallplate after they are
installed.
1. Engage tabs at the top of thermostat and wallplate. See
Fig. 5.
2. Press lower edge of case to latch.
NOTE: To remove the thermostat from the wall, first pull out
at the bottom of the thermostat; then remove the top.
A.
ENGAGE TABS AT TOP OF THERMOSTAT AND WALLPLATE.
B.
PRESS LOWER EDGE OF CASE TO LATCH.
Fig. 5. Mounting thermostat on wallplate.
INCREASE TIME SETTING
OR SCROLL FORWARD
THROUGH INSTALLER SETUP
AND SYSTEM TEST
SET CURRENT
DAY AND TIME
RETURN TO
NORMAL
OPERATIONS
ENTER
INDEFINITE
OR TIMED
HOLD MODE
SET CURRENT OR
PROGRAM DAY
CHANGE BETWEEN
DAYLIGHT SAVINGS
AND STANDARD TIME
COPY ONE PROGRAMMED
DAY TO ANOTHER DAY
68-0165—1
®
IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTAT
M15043
SET WAKE TIMES
AND SETPOINTS
Time
Set Current
Run
Program Day/Time
Hold Temp
Day
Daylight
Copy
Time
Fig. 6. T8611G key locations and descriptions.

SETTINGS

Using Thermostat Keys
The thermostat keys are used to:
• set current day and time,
• program times and setpoints for heating and cooling,
• temporarily override program temperatures,
• display present setting,
• configure Installer Setup,
• check System Test,
• display outdoor temperature (select models),
• set the system operation,
• set the fan operation.
See Fig. 6 for the location of the keys.
LED Indication
Two LED indicators are located in the upper right of the
thermostat. They indicate when a CHECK or FAIL signal is
sent to the thermostat from the system. See Fig. 7.
TWO LED
INDICATORS
Fig 7. LEDs location
SET LEAVE TIMES
AND SETPOINTS
SET RETURN TIMES
AND SETPOINTS
Set Program
Wake Leave Return Sleep
Heat/Cool
System Fan
Settings
CHANGE BETWEEN HEATING
AND COOLING SETPOINTS
DECREASE TIME SETTING OR SCROLL
BACKWARD THROUGH INSTALLER
SETUP AND SYSTEM TEST
6
M10675
INCREASE TEMPERATURE
SETTING OR SCROLL
FORWARD THROUGH
INSTALLER SETUP OPTIONS
DECREASE TEMPERATURE
SETTING OR SCROLL
BACKWARD THROUGH
INSTALLER SETUP OPTIONS
DISPLAY INFORMATION
SUCH AS PRESENT
SETTINGS AND OUTDOOR
TEMPERATURE
SET SLEEP
TIMES AND
SETPOINTS
SELECT FAN
OPERATION
SELECT SYSTEM
OPERATION
M10405A