Table of Contents
Advertisement
T8611G CHRONOTHERM
3. Press Time
or Time
displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
Time
Time
Set Program
Run
Set Current
Wake
Leave
Return
Program
Day/Time
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Time
Set Program
Daylight
Set Current
Run
Leave
Wake
Return
Program
Day/Time
Time
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
4. Press Run Program.
Time
Set Program
Run
Run
Set Current
Wake
Leave
Return
Day/Time
Program
Program
Heat/Cool
Hold Temp
Day
System
Settings
Daylight
Copy
Time
INSTALLER SYSTEM TEST
Use the Installer System Test to check the thermostat
operation. Refer to Table 7 for a list of the available system
tests.
To start the system test:
CAUTION
The minimum off time for compressors is bypassed
during the Installer System Test. Equipment damage
can occur if the compressor is cycled too quickly.
Press and hold the increase
same time, until 10 appears. All segments of the display are
displayed for three seconds before 10 appears. See Fig. 11
and 12.
68-0165—1
®
IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTAT
until the current time is
Set Day/Time
AM
Tue
Sleep
Fan
M10314
Set Day/Time
AM
Tue
Sleep
DST
Fan
M10315
AM
Room
Tue
Sleep
Wake
System
DST
Fan
Fan
Heat
Auto
M10316
and
decrease keys, at the
Set Program
Start Time
Set Day/Time
Hold for
Em Ht
Aux Ht
Mon
TueWedThuFriSatSun
Wake
LeaveReturnSleep
System
Em Heat
Off
Cool
Auto
Fig. 11. Display of all the segments of the LCD.
TEST NUMBER
Fig. 12. Display of test number.
Table 7. Tests Available in Installer System Test.
Test
Number
System Test Description
10-19
Heating equipment can be turned on and off
20-29
Emergency heat equipment can be turned on
and off
30-39
Cooling equipment can be turned on and off
40-49
Fan equipment can be turned on and off
60 0 to
Keyboard keys test
60 19
70-79
Thermostat information including date code and
software versions are displayed
Refer to Table 8 for the directions and results of the specific
tests.
NOTE: Press Time
to advance to the next test and Time
to go to the previous test. Press Run Program to
exit the system test.
10
Temporary Setting Enrg
Sav
AM
Room
PM
%Humid
Heat
Cool
Outdoor
In
Recovery
Auto
Repl Batt
DST
Fan
Wait
On
Auto
M10345
M10257A
Hide quick links:
Advertisement
Table of Contents
