Af Fine Adjustment - Pentax K-1 Operating Manual

Selecting the Desired Focusing Area
You can set the position and range of the autofocusing area (AF
area).
1
Set the autofocus mode to g or h.
2
Press c.
3
3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
Changes the position of the AF area.
ABCD
Increases/reduces the size of the AF
R
area (when g is selected).
Returns the AF area to the center.
M
4
Press E.
The AF area is set.
t Memo
• For the autofocus operation when shooting with Live View,
the following settings can be set in [Contrast Detection AF] of
the A1 and C1 menus.
Contrast AF
Focus Peaking
Contrast AF Options Focus-priority, Release-priority
When [Focus Peaking] is set to [ON], the outline of the subject
in focus is emphasized, and this makes it easier to check the
focus. This function works in both v and w modes.
54
e, f, g, h, i
ON, OFF

AF Fine Adjustment

You can precisely fine-tune your lenses with the camera's
autofocus system.
1
Select [25 AF Fine Adjustment] in E4 menu and
press D.
The [25 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
Applies the same adjustment value to all
Apply All
lenses.
Saves an adjustment value for the lens being
Apply One
used. (Up to 20 values)
OK OK
3
Select [Setting] and adjust
the value.
Available operations
D/R to the right
C/R to the left
M
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
E4
25 25 AF Fine Adjustment AF Fine Adjustment
3 3 Apply One Apply One
±0 ±0
Setting Setting
Reset Individual Settings Reset Individual Settings
±0 ±0
Cancel Cancel Save Save
Adjusts the focus to a closer
position.
Adjusts the focus to a farther
position.
Resets the adjustment value
to the default setting.