Ae Metering - Pentax K-1 Operating Manual

5
Select the Noise Reduction
level for each ISO setting.
Available operations
3
Shows the next/previous page.
R
M Resets the Noise Reduction level to the
default setting.
6
Press F.
The screen of Step 3 reappears.
7
Press F twice.
50
High-ISO NR High-ISO NR
1
ISO ISO 100 100
ISO ISO 200 200 Choose the part of the sensor to use for measuring brightness
ISO ISO 400 400
and determining the exposure.
ISO ISO 800 800
ISO ISO 1600 1600
ISO ISO 3200 3200
1
ISO ISO 6400 6400
Reset Reset
t Memo
• The metering method can also be set in [AE Metering] of the

AE Metering

Turn R while pressing
2.
Meters the brightness in multiple different
Multi- zones of the sensor.
A
segment In backlit conditions, this mode
automatically adjusts the exposure.
Meters the brightness with an emphasis
on the center of the sensor.
Center-
B The sensitivity increases at the center and
weighted
no automatic adjustment is performed
even in backlit conditions.
Meters the brightness only within a limited
C Spot area at the center of the sensor.
Useful when the subject is small.
A1 and C1 menus.
A1/C1
5.6 5.6
2 5 0 250
1/ 1/ F F
1 6 0 0 1600
99999 99999
99999 99999