Pentax K-1 Operating Manual page 64

Recorded Pixels
Interval
Standby Interval
Number of Shots Select from 2 to 2000 times.
Start Interval
3
Start Time
Composite Mode
Save Process
Fade-out
5
Press E.
The screen of Step 1 reappears.
6
Press E.
The camera returns to standby mode.
7
Press 0.
When [Start Interval] is set to [Now], the first picture is
taken. When set to [Set Time], shooting starts at the set
time.
To cancel shooting, turn the main switch to [OFF].
After the specified number of shots are taken, the camera
returns to standby mode.
62
Select from z, u, or t (only for
V and w).
Select from 2 seconds to 24 hours.
Select from the minimum time or 1
second to 24 hours.
Select when and how to take the first
picture from [Now], [Self-timer],
[Remote Control], or [Set Time].
Set the shooting start time when [Start
Interval] is set to [Set Time].
Select from [Average], [Additive], or
[Bright] (only for U).
Select Z to save images in the
middle of processing (only for U).
Select the fade-out effect level of light
trails (only for w).
t Memo
• For q and U, a new folder is created and the captured
images are saved there.
• The shortest time that can be set for [Interval] is 10 seconds
when [Digital Filter], [Clarity], or [Skin Tone] is set, and 20
seconds when [HDR Capture] is set.
• The second and later exposures start at the intervals set in
[Interval]. If the exposure time is longer than the time set in
[Interval], some of the pictures that are supposed to be taken
at the set intervals are not actually taken. For example, if the
time set in [Interval] is 2 seconds and the exposure time is 3
seconds, the first exposure has not yet finished at the time the
second exposure is supposed to be started (2 seconds after
shooting has started), and so the second picture is not taken.
As a result, Interval Shooting ends before the specified
number of shots are taken. In such cases, you can set
[Standby Interval] in [13 Interval Shooting Options] of the E2
menu so that every picture is taken at the set intervals after
each exposure ends. The screen displayed in Step 4 varies
depending on the [13 Interval Shooting Options] setting.
• For q and U, the focus position used when the first picture
is taken is locked. When performing autofocus for each
exposure, set [14 AF in Interval Shooting] to [Adjusts focus for
each shot] in the E2 menu.
• For U and w, set the camera on a fixed support such as
tripods during shooting.
• For V and w, [Shake Reduction] of the A4 menu is fixed to
[OFF].
• For w, the camera operates in L mode regardless of the
mode dial setting.