Table of Contents
Advertisement
C h a p t e r 3
To check your Accompli 009 modem settings on your PC:
On the Windows taskbar, click Start>Settings>Control Panel.
1
Double-click Modems.
2
On the Modem Properties dialog box, select the Accompli 009 modem, then click
3
Properties.
Make certain the maximum speed is set to 38400.
4
Click the Connection tab to verify the data bits, parity, and stop bits settings.
5
Click the Advanced button to verify the flow control settings.
6
Click OK to save any changes you make.
7
To change the RF Modem application settings on your device:
Select the RF Modem application from the Home screen.
1
On the toolbar, select the Settings button.
2
Select the appropriate settings in the spin boxes. The options and defaults are as
3
follows:
Connection Type
Bits per Second
Data Bits
Parity
Stop Bits
Flow Control
Select the Save button from the toolbar to save any changes you have made.
4
To access the RF Modem application:
Select the RF Modem application from the Home screen.
1
Select Connect from the toolbar.
2
To disconnect, select Disconnect from the toolbar.
3
To restore RF Modem default settings:
Select the RF Modem application from the Home screen.
1
On the toolbar, select the Settings button.
2
Select the Default button from the toolbar.
3
48
Accompli 009 User's Guide
U s i n g t h e R F M o d e m
Cable
38400 is recommended
8 (default) and 7
None (default), Even and Odd
1 (default) and 2
None (default), Hardware, and Software
Advertisement
Table of Contents
