Table of Contents
Advertisement
Setting the Alert Volume Level
The Home screen displays the current volume level for alerts. You can set the alert volume
level directly from the Home screen. Press
to choose from the following volume levels:
ENTER
Loud - Sets all audible alerts to the loud volume.
Soft - Sets all audible alerts to the soft volume.
Vibrate - Sets all alerts to vibrate without changing the individual alert setting.
Silent - Silences all alerts without changing the settings.
Setting Transmit Status
Before attempting to place a phone call or send and receive messages, ensure that your
device is set to the proper transmission mode.
The Home screen displays the current transmit status. You can set the transmit status
directly from the Home screen. Press
to choose from the following:
ENTER
Phone - Voice and data calls can be made.
PDA - Voice and data calls cannot be made.
Setting Phone Preferences
You can set phone preferences that willl determine how your phone makes and receives
calls.
See "Setting Phone Preferences" on page 67 for instructions on setting up your phone.
Entering Service Provider Information
Before you can use the Email application, you must make certain that your CSD or GPRS
service provider information is set up correctly.
See "Service Provider" on page 143 for steps on entering Service Provider information.
C o n f i g u r i n g Yo u r A c c o m p l i 0 0 9
to move to the volume level indicator. Press
TAB
to move to the transmit status indicator and press
TAB
Using Accompli 009
33
Advertisement
Table of Contents
