Ricoh Pentax K-3 II Operating Manual page 81

Setting
Enable AF1
Enable AF2
AF
Button
Cancel AF
Optical
Preview
Preview
Dial
Digital
Preview
4
Press E.
5
Press F.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
6
Press F twice.
u Caution
• [LCD Panel Illumination] in [RAW/Fx Button] cannot be
selected when [21. LCD Panel Illumination] is set to [Off] in
the E3 menu.
Function Page
Autofocus is performed
when I is pressed.
Autofocus is performed
when I is pressed.
Half press of the shutter
release button is p.44
disabled.
While I is pressed,
half press of the shutter
release button is
disabled.
Activates the Optical
Preview function.
p.47
Activates the Digital
Preview function.
Setting the One Push File Format
Select the file format to change to when P is pressed for
each [File Format] setting.
1
Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of "Setting the Button Operation"
(p.78).
2
Select T or S for [Cancel after 1 shot].
The recording format returns to the [File Format]
setting of [Image Capture Settings] in the A1 menu
T
after a picture is taken.
The setting is retained until any of the following
operations is performed:
S • When P is pressed again
• When 3, F, or G is pressed, or when the
mode dial or main switch is turned
3
Select the file format when
P is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when P is
pressed.
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] in the A1 menu is set to [Separate
RAW/JPEG]. (p.37)
5
RAW/Fx Button RAW/Fx Button
One Push File Format One Push File Format
Cancel after 1 shot Cancel after 1 shot
Cancel Cancel OK OK
79