Using A Wireless Memory Card - Ricoh Pentax K-3 II Operating Manual

Using a Wireless Memory Card

A memory card with a built-in wireless LAN (Wi-Fi) "Eye-Fi card"
or a "Flucard" compatible with this camera can be used. By
using these cards, images can be transferred from the camera
to a computer or other device via wireless LAN.
You can set the camera action for when an Eye-Fi card or a
Flucard is used.
1
Select [Wireless Memory Card] in D3 menu and
press D.
The [Wireless Memory Card] screen appears.
2
Select [Action Mode].
5
Items that can be set are
displayed according to the type of
card inserted.
Eye-Fi card
Transfers automatically when images are
taken, new images are saved, or images are
AUTO overwritten.
For movies, only files of 2 GB or less can be
transferred.
Transfers images or folders that are selected in
SELECT [Eye-Fi Image Transfer] of the playback mode.
Only JPEG and RAW images can be transferred.
OFF Stops the communication function.
Flucard
ON Enables wireless data transfer with Flucard.
OFF Disables wireless data transfer with Flucard.
3
Specify [Auto Resize].
When set to T, JPEG images are saved to the Eye-Fi card
or Flucard with the size of r.
4
Press F twice.
86
u Caution
D3
• Insert an Eye-Fi card or a Flucard in the SD2 slot. If it is
• Set up a wireless LAN access point on a computer for the
• For RAW images and movie files, the success of transfer
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images. The
Wireless Memory Card Wireless Memory Card
• For precautions on the Eye-Fi card, refer to "About Eye-Fi
Action Mode Action Mode
Auto Resize Auto Resize
Communication Info Communication Info
Firmware Info/Options Firmware Info/Options
t Memo
Automatically transfers Automatically transfers
unsent images from memory card unsent images from memory card
• A smartphone can be used to operate the camera when a
Cancel Cancel OK OK
• When an Eye-Fi card is used, 100 images can be stored in a
• In Step 2, select [Communication Info] to check the wireless
• When [Reset Transfer Settings] is selected in Step 2, the
inserted in the SD1 slot, the wireless LAN function cannot be
used. When an Eye-Fi card or a Flucard is not inserted in the
SD2 slot, the [Wireless Memory Card] settings cannot be set.
card connection.
depends on the specifications and settings of the Eye-Fi card
in use. GPS log files cannot be transferred.
camera may turn off if the internal temperature of the camera
becomes high.
Cards" (p.108).
Flucard compatible with this camera is used. Refer to the
Flucard manual for details on how to use the card.
single folder. For RAW+ images, two files are counted as one
image.
LAN information, and [Firmware Info/Options] to check the
firmware version of the card.
[Action Mode] setting is returned to the default value.