Using The Gps - Ricoh Pentax K-3 II Operating Manual

t Memo
• The adjusted composition is saved even if Live View is ended
or the camera is turned off. To reset the saved adjustment
value when Live View is ended, set [Composition Adjust.] to
S (Off) in [Memory] of the A4 menu. (p.82)
3
62

Using the GPS

The following functions are available with the camera's built-in
GPS unit.
Saves the GPS positioning data received
GPS Logging
periodically to the memory card. (p.64)
Tracks and captures celestial bodies. (p.65)
By matching the movement of the built-in
Shake Reduction unit with the movement of
ASTROTRACER
celestial bodies, celestial bodies can be
captured as individual points even when
shooting with a long exposure setting.
Automatically adjusts the camera's date
GPS Time Sync and time settings using information
obtained from GPS satellites. (p.63)
Press 4 to turn the GPS on. A
beep sounds and the GPS indicator
lamp lights up. Press 4 again to
turn the GPS off.
You can check the GPS positioning status on the status screen
and Live View screen.
Green 3D positioning
Yellow 2D positioning
Red No positioning
When a picture is taken while the GPS is on, the GPS data is
recorded in the image. The GPS data is not recorded in movies.
You can check the GPS information in Detailed Information
Display in playback mode. (p.14)
GPS positioning status
2 5 0 25 0
1/ 1/
5.6 5.6 1 6 0 0 1 60 0
F F
12345 12345
12345 12345