Setting The White Balance - Ricoh Pentax K-3 II Operating Manual

5
Press the shutter release button to start
shooting.
When [Start Interval] is set to [Now], the first picture is taken.
Instant Review is displayed, and then the monitor turns off.
To cancel shooting, press the shutter release button
halfway, and press F in standby mode.
After the set number of pictures are taken, the camera
returns to standby mode.
3
t Memo
• The shortest interval times that can be set for [Interval] are 10
and 20 seconds for [Digital Filter] and [HDR Capture] of the
C1 menu, respectively.
54

Setting the White Balance

1
Press C in standby mode.
The White Balance setting screen appears.
2
Select the desired white
balance setting.
g Auto White Balance
g
u Multi Auto White Balance
Daylight
h
Shade
i
Cloudy
j
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
k
s Fluorescent - Cool White
t Fluorescent - Warm White
Tungsten
l
Flash
m
n Color Temperature Enhancement
Manual White Balance 1 to 3
o
Color Temperature 1 to 3
p
Available operations when shooting with the
viewfinder
Main switch to U Uses Digital Preview to preview
the background image with the
white balance setting applied.
H Saves the preview image (only
when the image can be saved).
Proceed to Step 5 if you do not need to fine-tune the white
balance.
Auto White Balance Auto White Balance
Check Check
Cancel Cancel OK OK
WB± WB±