Ricoh Pentax K-3 II Operating Manual page 59

3
Press G.
The parameter setting screen appears.
4
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
Switches between [Contrast], [Highlight
Q
Adjustment], and [Shadow Adjustment].
Switches between [Sharpness], [Fine
R
Sharpness], and [Extra Sharpness].
(Not available in C mode).
Resets the adjustment value to the default
M
setting.
5
Press E.
The screen of Step 2 reappears.
6
Press E.
The camera returns to standby mode.
u Caution
• This function is not available when in T mode.
• The Digital Preview operation in Step 2 cannot be performed
when the drive mode is set to [Multi-exposure], [Interval
Shooting], or [Interval Composite].
Saving the Cross Processing Settings of a
Captured Image
The outcome of Cross Processing varies each time a picture is
Saturation Saturation
taken. If you take a cross processed image that you like, you
Check Check can save the Cross Processing settings used in the image so
that you can repeatedly use the same settings.
1
Cancel Cancel OK OK
2
3
4
t Memo
• The saved Cross Processing settings can be loaded by
selecting [Cross Processing] in Step 2 of "Custom Image"
(p.56), and selecting one of the Favorite settings 1 to 3 for the
parameter.
Press B in single image display of playback
mode.
The playback mode palette appears.
Select a and press E.
The camera searches for cross processed images starting
from the most recent image taken.
[No cross processed image] appears if there are no cross
processed images.
Use Q to select a cross
processed image.
Select the "Favorite" number 1, 2 or 3 to save
the settings, and press E.
The settings of the selected image are saved as your
"Favorite" settings.
3
100-0001 100-0001
Saves this image's Cross Saves this image's Cross
Processing settings Processing settings
Save as Favorite 1 Save as Favorite 1
Save as Favorite 2 Save as Favorite 2
Save as Favorite 3 Save as Favorite 3
Cancel Cancel OK OK
57