Anti-Aliasing Filter Simulator; Composition Adjustment - Ricoh Pentax K-3 II Operating Manual

Anti-Aliasing Filter Simulator

By shaking the Shake Reduction unit, a moiré reduction effect
simulating that of a low-pass filter can be achieved.
1
Select [AA Filter Simulator] in A3 menu and
press D.
2
Select a type and press E.
Takes pictures balancing the resolution and
TYPE1
moiré reduction.
TYPE2 Prioritizes moiré reduction.
Takes consecutive 3 images in order of [Off],
Bracketing [TYPE1], and [TYPE2] (3 images are taken with
one press of the shutter release button).
u Caution
• This function cannot be used in some capture modes or in
combination with some other functions. (p.87)
• [Bracketing] cannot be selected in the following situations.
• In M mode
• When the drive mode is set to other than [Single Frame
Shooting], [Self-timer] (12 seconds, 2 seconds), or
[Remote Control] (now, after 3 seconds)
• When HDR Capture is set
• When the number of storable images is 2 or less
• When the shutter speed is faster than 1/1000 seconds, the full
effect of this function cannot be achieved.
A3/v
By using the Shake Reduction mechanism, the composition of the
image can be adjusted. Use this function when you want to adjust the
composition, such as when using a tripod during Live View shooting.
1
2
99999 99999 99999 99999
Live View Live View
3
Electronic Level Electronic Level
Horizon Correction Horizon Correction
AA Filter Simulator AA Filter Simulator
Shake Reduction Shake Reduction
Input Focal Length Input Focal Length
4
Cancel Cancel OK OK
5
6
u Caution
• This function cannot be used in the following situations.

Composition Adjustment

Select [Live View] in A3 menu and press D.
The [Live View] screen appears.
Select [Composition Adjust.] and set to T.
Press F twice.
The camera returns to standby mode.
Press K.
Live View is displayed and the message [Adjust the
composition of the image] appears.
Adjust the composition.
The amount of adjustment (the
number of steps) is displayed at
the top right of the screen.
Available operations
Moves the composition of the image (up
ABCD
to 24 steps).
Adjusts the level of the composition (up
R
to 8 steps. Not available when the
amount of adjustment to move the
composition is 17 steps or more).
Resets the adjustment value to the
M
default setting.
Press E.
The camera returns to standby mode in Live View.
• When the drive mode is set to [Interval Shooting], [Interval
Composite], or [Interval Movie Record]
• When using the ASTROTRACER function
A3
3
0 0 0 0
0 0
Adjust the composition Adjust the composition
of the image of the image
Cancel Cancel OK OK
61