Ricoh Pentax K-3 II Operating Manual page 28

Menu Item
8. Bracketing Order
9. One-Push Bracketing
1
10. WB Adjustable Range
11. WB When Using Flash
E2
12. AWB in Tungsten Light
13. Color Temperature Steps
14. Superimpose AF Area
15. AF.S Setting
16. 1st Frame Action in AF.C
17. Action in AF.C Continuous
E3
18. Hold AF Status
19. AF with Remote Control
20. Color Space
21. LCD Panel Illumination
22. Save Rotation Info
23. Save Menu Location
24. Catch-in Focus
E4
25. AF Fine Adjustment
26. Using Aperture Ring
Reset Custom Functions
26
Function
Sets the order for Exposure Bracketing shooting.
Shoots all frames with one release when using Exposure Bracketing.
Sets whether to automatically fine-tune the white balance when
the light source is specified for the white balance setting.
Sets the white balance setting when using a flash.
Sets the tungsten light color tone when the white balance is set to
[Auto White Balance].
Sets the adjustment steps for the Color Temperature option of the
white balance.
Displays the active AF point in red in the viewfinder.
Sets the action priority for when the autofocus mode is set to
x and the shutter release button is fully pressed.
Sets the action priority for the first frame when the autofocus mode
is set to y and the shutter release button is fully pressed.
Sets the action priority during Continuous Shooting when the
autofocus mode is set to y.
Maintains the focus for a certain amount of time when the subject
happens to move out of the selected focusing area after being focused.
Sets whether to use autofocus when shooting with a remote
control unit.
Sets the color space to use.
Sets the illumination for the LCD panel.
Saves rotation information when shooting.
Saves the last menu tab displayed on the monitor and displays it
again the next time F is pressed.
Enables Catch-in Focus shooting when a manual focus lens is
attached. The shutter is released automatically when the subject
comes into focus.
Allows you to precisely fine tune your lenses with the camera's
autofocus system.
Enables the shutter to release when the lens aperture ring is set
to a position other than 9 (Auto).
Resets all the settings of the Custom Setting menus to the defaults.
Default Setting Page
p.51
0 - +
Off p.51
Fixed p.55
Auto White
p.55
Balance
Strong
p.55
Correction
Kelvin p.56
On p.16
Focus-priority p.45
Release-
p.45
priority
Focus-priority p.45
Off p.45
Off p.50
–
sRGB
High p.17
On p.69
Reset Menu
p.19
Location
Off –
Off p.47
Disable p.89
– –