Simple Editing - Sony sl-hf600 Operating Instructions Manual

SIMPLE EDITING
You can simply start and stop editing without marking the
editing points. Use two SL-HF1000s and connect the
CONTROL T jacks.
For the connection, see page 85.
1 Press
EDIT ASSEMBLE on the playback VCR
2
Locate the starting point of the scene
on
the playback
VCR and s e t the VCR to playback
pause mods.
3
Locate the point at whkh editlng b to start on the editlng
VCR and set
the
VCR to playback pause mode.
4
R.ess EDIT STAFIT on the playback VCR
Assemble editing will start
5
On the playback VCR, decide the ending point by
obwming the picture on the monitor
screen and press
IlIbM PAUSOSTlLL
The playback VCR will be set to playback pause made in
2seconda
The editing VCR rewinds the tape to the ending point and
then is set to playback pause mode.
To edit another scene, press EDIT ASSEMBLE to
relslase
assemble editing
mode and prerss
it again.
1
Press VIDEO andlor AUDIO INSERT button on the
editing VCR.
2
Locate the point at which editing is to start on the
edltlng VCR and set the VCR to playback pause mode.
3
Locate the starting point of the
scene
to be inserted on
the playback VCR and set the VCR to playback pause
mode.
4
Press EDIT START on the editing VCR.
Insert edklng will start.
5 On
the editing VCR, decide the ending point by
observing the picture
on
the monitor
screen and press
lllw
PAUSEISTILL
The editing VCR plays the tape back for 2 seconds,
rewinds the tape to the ending point, and is set to
playback pause mode.
The playback VCR will be set to playback pause mode
in 2 seconds.
m e n editing of one scene is finished, the tape on the
editing VCR is set at the ending point of the previous
editing.
Therefore,
you should only mark the starting point
(and the editing point) of the
next
scene to
be
edlted on
the playback VCR
and
press EDIT START. This method of
editing is called "Butt Edit".
Tape
j
1
for editing
Scene 1
Scene 2
I
I I
,
1
Starting point Ending point
(starting point of scene 2)
t
t
I
I
I
I
Original tape
(on the playback VCR)
I