Sony sl-hf600 Operating Instructions Manual page 21

CONNECTING A TV EQUIPPED WITH VlDEOlAUDlO INPUT JACKS
With the following connection, the picture and sound To view the playback picture, set the TVNIDEO input
quality will be better than that when the TV is connected
only to the VHFIUHF OUT terminal on the VCR.
TVlVlDEO input selector
Connecting cord (supplied)
To cancel
the automatic TVNTR mode
selection
o f
this
VCR
This VCR is preset at the factory so that it will be
automatically set to VTR
mode
when playback starts. To
cancel this function, proceed as follows:
1 Turn off the VCR.
2 Keeping the TVIVTR button depressed, press the
POWER switch.
The TVlVTR button blinks and the function is cancelled.
When playing back a tape, press TVNTR to set to VTR
mode.
To resume the automatic TVNTR mode selection, repeat
steps 1 and 2