Sony sl-hf600 Operating Instructions Manual page 18

When both VHF and UHF
antennas are
connected
1
Attach an optional
EAC66 U N
band separator (mixer) to
the VHFIUHF IN connector of the recorder.
2
Connect the antennas to the U N band separator.
3
Aattach another optional U N band separator to the
VHFIUHF OUT connector of the recorder.
4
Connect it to the VHF and UHF antenna terminals of
the TV.
When a TV has a 7 - UHFNHF ardenna twnlnal
Easy connection of the recorder to the TV can be made
with the supplied 75ohm coaxial cable regardless of the
types of antenna.
Cau#on
Connections between the recorder VHFIUHF OUT
connector and the antenna terminals of a TV receiver
should be made only as shown in these Instructions.
Failure to do so may result in operation that violates the
regulations of the Federal Communications Commission
regarding the
use
and operation of rf devices.
Never connect the wtput of the recorder to an antenna
or make simultaneous (parallel) antenna and recorder
connections at the antenna terminals of your
receiver.
Once the connections explained above have been made,
the antenna TV signals, as well as the signal from the
recorder, will be fed to the TV and you can view
TV
programs in the usual way.
Note
Keep the VCR away from the TV, if the display or sound
is affected.