TATA Motors Zest Owner's Manual page 70

05
CLIMATE CONTROLS
The system should be used with
recirculation air mode for faster heat
up and cool down, however keeping the
system in recirculation mode, particu-
larly with AC OFF, can cause the win-
dows fog up.
NOTE
It is recommended to run the vehi-
cle in re-circulation mode to avoid
clogging of air filter
7. AIR DISTRIBUTION
(MODE) BUTTON :
A. In AUTO mode, the FATC system
will regulate the mode automati-
cally. However user override is pos-
sible with the use of MODE button
to select the desired airflow mode.
Each time you press the MODE
button, the display shows the mode
selected.
70
FATC - FULLY AUTOMATIC TEMPERATURE CONTROL
Air flows from the center
and side air vents
Air flows from the center,
side vents and foot well
vents
Air flows from mainly foot
well vents
Air flows from the defroster
and foot well vents (always
select fresh air mode)
Air flows from the defroster
vents (always select fresh
air mode)
8. AUTOMATIC OPERATION :
To put the automatic climate control
in fully-automatic mode:
A. Press the 'AUTO' button.
B. Set the desired temperature by
turning temperature control knob.
The display will show all the
functions during 'AUTO' mode.
C. The system automatically selects
the proper mix of conditioned and /
or heated air that will, as quickly
as possible, raise or lower the
interior temperature to your prefer-
ence.
D. When you set the temperature to
its lower limit (Lo) or its upper limit
(Hi), the system runs at full
cooling or heating only. It doesn't
regulate the interior temperature.
Semi-automatic Operation :
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled .Making any
manual selection causes the word
'AUTO' in the display to go OFF and