TATA Motors Zest Owner's Manual page 117

BULB REPLACEMENT & ELECTRICAL FITMENT
1. Turn Indicator lamp
2. Reverse lamp
3. Stop Lamp
4. Tail Lamp
• Remove & replace the bulb.
• Rotate the bulb holder in clock wise
direction to lock the bulb holder on
lamp.
• While fitment, first engage tail lamp
catcher and then mounting bolts.
Tighten the mounting nuts and
properly refit boot carpet. For rivet
fitment, pull center pin, engage rivet
and then press the center pin of
rivet.
NOTE
Tail lamp is LED and can not be
replaced.
ELECTRICAL ACCESSORY FIT-
MENT : (if applicable)
Provision has been made in your
vehicle wiring to fit the following
electrical accessories.
EMERGENCY & BREAK DOWN ASSISTANCE
1. Music System.
2. Speakers.
3. Central Door Locking.
4. Reverse Parking Sensors.
5. Accessories Supply ( Fuse Pro-
tected) upto 7A.
A plug socket is provided behind the
dash board near the cockpit wiring
harness.
For details of fitment please contact
TATA MOTORS Authorized Service
Centre's (TASCs) only.
07
117