TATA Motors Zest Owner's Manual page 64

05
CLIMATE CONTROL
The Blower Speed control dial turns the
fan ON and OFF, and controls fan
speed.
C. Temperature Control:
The temperature control dial allows you
to adjust the temperature of the outlet
air. To lower the temperature, turn the
dial to the left. To increase the
temperature, turn the dial to the right.
D. Air Recirculation:
64
Recirculation mode: Switch 'ON'
(Indicator light ON): Interior
air is re-circulated inside the vehicle.
Always use when :
•
Driving on a dusty road.
•
On signals or slow traffic to avoid
traffic pollution
•
Maximum cooling is required.
Fresh Air mode : Switch 'OFF'
(Indicator light OFF):
Outside air is drawn into the passen-
ger compartment and distributed
through the selected outlet.
Always use when:
•
Discomfort is felt or windows are
fogging up.
•
Using or air flow modes
during demist / defrost.
•
Using normal heating mode.
MANUAL HVAC
AC ON/OFF:
Press the button to turn 'ON' the
AC compressor. The indicator light
turns 'ON' when the AC compressor
is operating.
To turn 'OFF' the AC compressor,
push the button again.
NOTE
The AC can be switched 'ON' only
if the blower is 'ON' and engine is
running.
When AC is switched ON, engine idling
RPM increases marginally to adjust the
AC compressor load.
When desired temperature is achieved
AC trips OFF automatically.