TATA Motors Zest Owner's Manual page 115

BULB REPLACEMENT
Parking lamp bulb (if fitted) :
• Lift the bonnet to access the bulb.
• Remove the high beam bulb dust
cover by simply pulling it off.
• Pull out the bulb holder by gently
pressing the side clips of the holder.
• Remove the bulb from the bulb
holder.
• Insert the new bulb (without touch-
ing the glass) into the bulb holder.
• Press fit the bulb holder with the
bulb.
• Press the high beam bulb dust
cover on headlamp housing until it
fits properly.
Replacing the Front Turn indicator
Bulb:
• Lift the bonnet to access the bulb.
• Rotate the front turn signal socket
plug assembly anticlockwise and
pull it straight back.
EMERGENCY & BREAK DOWN ASSISTANCE
• Pull the bulb holder along with bulb.
• Remove the bulb from the bulb
holder.
07
115