Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for TATA Motors Nano

  • Page 3 TA T T T T T A A A A A NANO NANO NANO NANO NANO Owner's Manual & Service Book This owner’s manual should be considered as a permanent part of the vehicle and must remain with the vehicle.
  • Page 4 ● The information and specifications given in this book are valid as on the date of printing. TATA MOTORS LIMITED reserves the right to make changes in design and specifications and/or to make additions to or improvements in this product without obligation to install them on products previously sold.
  • Page 5 FOREWARD Dear Customer, Thank you for selecting TATA NANO - the most exciting car. We welcome you to the world of advanced automotive engineering marvel suited to your operating conditions. This book gives you all the information necessary for making your ownership of this car a delighting experience and help you in all situations.
  • Page 6 CUSTOMER ASSISTANCE SAFETY AND VEHICLE DAMAGE SAFETY SYMBOL WARNINGS In this manual, you will In this manual, you will find also see a circle with a ‘CAUTION’, ‘NOTICE’, ‘WARNING’ slash. This means "Do messages and ‘safety symbol’ at not", "Do not do this", or appropriate places.
  • Page 7: Table Of Contents

    ENVIRONMENT PROTECTION If you have Flat tyre Environment Protection Starting The Engine with Jump AN OVERVIEW Leads Know Your Nano Towing the Car Driving Controls Routine Service Instrument Cluster & Indicators Preliminary Trouble shooting Steering Lock cum Ignition Switch 19...
  • Page 8 CONTENTS IMPORTANT TECHNICAL INFORMATION Belt Tension Fuel, Lubricants & Coolants Oil Filling & Drain Points Technical Specification Dimensions CAR IDENTIFICATION Loctation of Aggregate Number PDI SERVICE SERVICE MAINTENANCE SCHEDULE RECORD OF SERVICES PERFORMED...
  • Page 9: Warranty - Terms & Conditions

    WARRANTY - TERMS & CONDITIONS We WARRANT each TATA NANO repaired or altered otherwise than and parts there of manufactured by in accordance with our standard us to be free from defect in material repair procedure or by any person...
  • Page 10 WARRANTY - TERMS & CONDITIONS warranty shall not apply to any losses, incidental or indirect, or damage or deterioration caused inconvenience or consequential by environmental pollution or bird damages, loss of vehicle, or loss droppings. This warranty shall not of time, or otherwise, incurred or apply to V-belts, hoses and gas accrued.
  • Page 11 ENVIRONMENTAL CRAE TATA MOTORS LTD. is committed the engine running, do not produce vehicles using unnecessarily rev-up.Avoid environmentally sustainable stopping and starting. technology. Many features have Do not rev-up the engine before been incorporated in Tata Motors turning it off as it unnecessarily passenger vehicles which have burns the fuel.
  • Page 12: Environment Protection

    ENVIRONMENTAL CARE Do not pour used oils or 5. Ignition system & Spark plug. coolants into the sewage 6. Catalytic converter. drains, garden soil or open streams. Dispose the used 7. Carbon Canister. filters batteries This Owner ’s manual contains compliance with the current further information on driving legislation.
  • Page 13: An Overview

    Tata Motors Limited. We are happy to present the NANO to you and hope it brings the joy, pride and utility of owning a car for personal mobility. The NANO’s design and features combined with easy maneuverability...
  • Page 14 AN OVERVIEW KNOW YOUR NANO Fuel-efficient engine The Tata Nano has a rear mounted rear-wheel drive, all-aluminum, two- cylinder, multi point fuel injection petrol engine. The lean design strategy has achieved minimum weight and maximum performance per unit of energy consumed and delivers high fuel efficiency.
  • Page 15: Driving Controls

    AN OVERVIEW DRIVING CONTROLS DRIVING CONTROLS Note : a. HVAC or AC System is applicable to certain models. b. Music System is part of accessories. Steering wheel Clutch pedal Combi switch Parking Brake Side air vents Gear shifting lever Hazard warning switch Music system Horn Pad AC system controls...
  • Page 16: Instrument Cluster & Indicators

    AN OVERVIEW INSTRUMENT CLUSTER - NANO Standard & CX Speedometer Fuel level indicator Odometer Indicators shown may not be applicable to all models. Turn indicator (Left) Turn indicator (Right) Brake Fluid level check and High Beam Indicator Parking brake indicator...
  • Page 17: Instrument Cluster Nano Lx

    AN OVERVIEW INSTRUMENT CLUSTER - NANO LX Speedometer Fuel level indicator Tripmeter Reset Knob Odometer Indicators shown may not be applicable to all models. Brake Fluid level check and Turn indicator (Left) Parking brake indicator High Beam Indicator Battery charging indicator...
  • Page 18: Indicators

    AN OVERVIEW INDICATORS Turn Signal Indicator : High Beam Indicator : Turn signal indicators can be The indicator light comes on when operated only when ignition is ‘ON’. the High beam is selected or also They can be operated by using the when he headlight flasher is turn indicator switch on the combi- operated.
  • Page 19 An Overview INDICATORS Low Engine Oil • When ignition key is turned to Pressure Indicator : “IGN” position, this indicator lights up and goes off when This symbol lights up when the engine starts in normal condition. ignition switch is turn to the ‘ON’ If it is continuously ‘ON’...
  • Page 20: Gauges

    AN OVERVIEW INDICATORS & GAUGES Engine Coolant High Odometer and Trip meter* (on Temperature Indicator LCD): This light will come ON and starts blinking when engine coolant temperature is higher than normal . It indicates engine is overheating, Avoid driving in this situation and contact nearest authorised service outlet for necessary attention.
  • Page 21: Steering Lock Cum Ignition Switch

    AN OVERVIEW STEERING LOCK CUM IGNITION SWITCH ACC : Steering Lock cum Ignition Switch: By turning key to ACC (key in) position, all accessories function like music system will be ‘ON’. Engine running and all electrical gadgets and accessories ON. START: Turn the key further clockwise to the START position (spring loaded) to...
  • Page 22: Combination Switch

    AN OVERVIEW COMBINATION SWITCH Single Stalk Combination Switch: b) Position lamp ON. (For Standard & CX Versions) Position (Parking) lamp and tail lamp Single Stalk Combination Switch is will be ON in this position. provided on right hand side of steer- ing column.
  • Page 23 WIPER CONTROL SWITCH AN OVERVIEW COMBINATION SWITCH 3) Side Indicator : 1) Side indicator OFF 2) Lane change for Left or Right Turn (Spring Return) 3) Lane change for Left or Right Turn (Self cancellation / Manual RIGHT TURN return type) Push the stalk upwards for changing lane or turning to Left and downwards for changing lane or turning to Right...
  • Page 24 AN OVERVIEW COMBINATION SWITCH A) RIGHT HAND STALK 2) Fog Lamp Rotary Switch : 1) Light stalk: Inner rotary switch on the stalk is provided for selecting front & rear fog Outer rotary switch on right hand lamp. stalk is provided for selecting Position (Parking) or Head lamp.
  • Page 25: Music System

    AN OVERVIEW COMBINATION SWITCH Music System (if applicable) : 3) Side Indicator : Push the stalk upwards for changing lane or turning to Left and downwards for changing lane or turning to Right according to requirement. It has three positions. The music system can be fitted on the facia.
  • Page 26: Conditioning

    AN OVERVIEW HVAC & AIR CONDITIONING B. Blower Speed selection Knob : HVAC / A.C. : (As provided) The HVAC system has a three speed blower. The blower speeds can be selected by operating the blower knob (B). HVAC A - Air direction mode selection knob C.
  • Page 27 AN OVERVIEW HVAC & AIR CONDITIONING E. Recirculation / Fresh Air knob: Whenever discomfort is felt switch to fresh air circulation mode. Recirculation Fresh Air NOTICE mode mode • We strongly recommend AC to be used in recirculation mode for better cooling. •...
  • Page 28 AN OVERVIEW HVAC & AIR CONDITIONING Normal Heating : (Only on HVAC) cooling (Blue) position (For HVAC only). At maximum cooling, AC trips (For vehicles fitted with HVAC) off automatically when the desired Knob 'A' - At suitable position as per temperature is achieved.
  • Page 29 AN OVERVIEW HVAC & AIR CONDITIONING Ventilator : NOTICE When mist gets cleared switch the knob "A” position to Face mode. In high humidity areas, if cold air continues flow over windshield, it may cause sudden fogging on outside surface of windshield.
  • Page 30: Lamps

    AN OVERVIEW LAMPS Head Lamp: Tail Lamp: High / Low Beam The tail lamp assembly incorporates Position / Parking Lamp the following : Front Direction Indicator Tail / Brake Lamp Turn Signal Indicator Head lamps are clear lens type having Reverse Lamp multi focal reflector and are provided Reflex Reflector...
  • Page 31 AN OVERVIEW LAMPS High Mounted Stop Lamp : Interior Lamp : High mounted stop lamp is provided Interior lamp is provided on the roof, on the rear side of vehicle. It will glow near the inner rear view mirror. Its along with stop lamps whenever switch has three positions.
  • Page 32: Sun Visor & Rear View Mirrors

    AN OVERVIEW REAR VIEW MIRRORS & SUNVISORS Inner Rear View Mirror : WARNING NOTICE Inner rear view mirror is provided Be careful when judging the size inside the cab. or distances of a vehicle or other Normal mirror is applicable for object seen in the side convex standard version.
  • Page 33: Grabe Handle & Utility Box

    AN OVERVIEW ROOF GRAB HANDLE & UTILITY POCKET / BOX Roof Grab Handle :(If fitted) NOTICE When not in use keep the sun visors in their original position other wise they may lock the driver’s vision. These are provided for comfortable positoning of passengers during journey.
  • Page 34: Power Socket, Cup Holder

    AN OVERVIEW POWER SOCKET & CUP HOLDER FLOOR CONSOLE : CAUTION A) Power Socket or Cigarette Handle the lighter carefully to avoid Lighter: (As applicable) personal injury. Power Socket Fitment Provision: If lighter does not pop out, remove it to avoid overheating. Avoid smoking inside the vehicle;...
  • Page 35: Window Winding & Parking Brake

    AN OVERVIEW WINDOW WINDING & PARKING BRAKE LEVER Power window switch (Front Where power windows are not Doors) : if fitted provided, manually operated winder handles are provided. Use winder handle for lowering down or raising up window glasses. Parking Brake Lever : Window glasses on front doors can be operated by switches provided on the main control panel located on the...
  • Page 36: Gear Shift Lever & Refuelling

    AN OVERVIEW GEAR SHIFT LEVER & REFUELING Gear Shift Lever : Rotate fuel filler anitclockwise and open to fill the fuel. After filling the fuel close the cap by rotating clockwise till you heard clicking sound. Ensure that hood is properly locked.
  • Page 37: Front Hood

    AN OVERVIEW FRONT HOOD OPENING & CLOSING Opening the front hood : Lift the hood up. Pull the hood stay rod from its clip & insert the free end Ensure that the vehicle is in neutral into the slot in the hood, slide stay gear with the parking brake applied.
  • Page 38: Getting Started

    GETTING STARTED KEYS & DOOR LOCK Keys : The key operates all locks and Ignition switch. A code number is stamped on the plate attached to the key set. Detach Locking / unlocking doors with key this plate and store at safe place (Not from outside : in the vehicle).
  • Page 39: Door Lock & Seat Adjustment

    GETTING STARTED DOOR LOCK OPENING & SEAT ADJUSTMENT Opening the doors from inside : Driver Co-driver Std. Slider Fixed Location of door opening lever/ latch Slider with Fixed recliner Slider with Slider with recliner recliner Bucket type front seats are provided with a lever and recliner handle knob, to adjust seat positions.
  • Page 40: Rear Seat & Seat Folding

    Getting Started REAR SEAT Rear Seat 2) Fold the seat back rest, once it is unlocked. A cushion bench seat is provided for the rear passengers. Folding of rear seat back rest For folding the rear seat back rest: 1) Pull both straps provided on seat back rest top simultaneously to unlock the seat back rest .
  • Page 41: Seat Belts

    GETTING STARTED SEAT BELT Seat Belts Occupants safety is of utmost importance. Your car is equipped with seat belts, both front and rear as a part of occupant restraint system. Why Seat Belts Wearing seat belts properly can protect you from being thrown 1.
  • Page 42 GETTING STARTED SEAT BELT 10. The belts if required should be WARNING replaced, Authorised Improper positioning of the personnel only. shoulder portion of the seat belt 11. The belt should is dangerous. An improperly disassembled. If required, positioned belt will provide little authorised personnel only or no protection in a collision.
  • Page 43 Failure to do so could increase the chance of injury and / or the severity of injury in accidents. Baby or Small Child : TATA MOTORS recommends the use of a seat-belt. Kindly consult your doctor specific recommendations. The lap belt...
  • Page 44: Driving

    DRIVING BEFORE DRIVING & SAFETY CHECKS 7. Check and ensure that all the BEFORE DRIVING gauges and indicators in the Please ensure to check (Refer instrument cluster are working. maintenance) 8. Gear shift lever is in neutral 1. Tyre pressure and condition of position tyres.
  • Page 45: Safety Checks & Driving Safety

    DRIVING SAFETY CHECKS & DRIVING SAFETY Horn DRIVING SAFETY Ensure the horn is working properly. Seat Belt Horn provides safety to other road Seat-belts are life saving equipment, users by alerting your presence. use of seat-belt reduces the chance of injury and severity of injury in case Brakes of an accident.
  • Page 46: Fuel Economy

    DRIVING FUEL ECONOMY FRIENDLY TIPS TO IMPROVE NOTICE FUEL ECONOMY : Do not rest your foot on the clutch Your vehicle's fuel economy is mainly pedal. It does not allow full engine dependent on your style of driving. power to be transmitted to the vehicle and reduces clutch life.
  • Page 47: Starting, Stopping

    DRIVING STARTING / STOPPING THE ENGINE & PREPARING TO DRIVE Starting the Engine Stopping the Engine Before starting Before switching off the engine, run the engine in idle condition for at least 1. Apply parking brake. 30 seconds and then switch ‘OFF’. 2.
  • Page 48: Gear Shifting, Braking & Parking

    DRIVING GEAR SHIFTING, BRAKING & PARKING Gear Shifting : The non-booster type braking system may not be fitted in the The gearshift pattern is shown on the Standard model, while the CX and gear shift lever knob. All forward LX models are provided with gears being synchronized, provide booster-assisted braking system.
  • Page 49: Driving In Adverse Conditions

    DRIVING DRIVING IN ADVERSE CONDITION Driving Through Water : Driving on a Rainy Day : Never venture to drive through water Check brakes, steering, windows, when it flows over the guard stones tyres for wear and tyre pressure. on a bridge. Check wiper blades for proper functioning.
  • Page 50 DRIVING DRIVING IN ADVERSE CONDITION Use side indicators for lane change If the wheels start to slip within few or turning. feet of the end of the climb, motion can be maintained by swinging the Switch on hazard warning switch in steered wheels left and right, thereby case of hazardous parking or if your providing increased grip.
  • Page 51: Incase Of Emergency

    ADVANCE WARNING TRIANGLE & INCASE OF EMERGENCY HAZARD WARNING SWITCH Advance Warning Triangle : Hazard Warning Switch : An advance warning triangle is Use Hazard Warring lights besides provided along with your vehicle. In advance warning triangle in case of case there is a breakdown and or the breakdown specially during night vehicle is to be parked at the side of...
  • Page 52: If You Have Flat Tyre

    INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE IF YOU HAVE A FLAT TYRE: Important information about 1. Reduce vehicle speed gradually Tyre sizes of your Car keeping it in a straight line. Move To achieve the optimum vehicle cautiously off the road to safe performance, your vehicle is fitted place away from traffic.
  • Page 53 INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE Location and Removal of Spare Location of Wheel spanner and wheel: Tow hook. They are located below Driver seat behind battery in a tool kit bag Advance Warning Triangle: Advance warning triangle is located behind rear seat back rest below parcel shelf in a bag.
  • Page 54 INCASE OF EMERGENCY IF YOU HAVE A FLAT TYRE CAUTION Follow the jacking instructions. Make sure to set the jack properly in the jack point. Raising the vehicle with improperly positioned will damaged the vehicle or may cause the personal injury. Do not carry any other work or never get under the vehicle supported by jack.
  • Page 55: Starting The Engine With Jump Leads

    STARTING THE ENGINE INCASE OF EMERGENCY WITH JUMP LEADS Starting the Engine with Jump • Switch off all unnecessary Leads : electrical loads. The engine with a discharged battery • Do not lean over the battery may be started by transferring during jump starting.
  • Page 56 STARTING THE ENGINE INCASE OF EMERGENCY WITH JUMP LEADS Following order should be Towing the Vehicle : followed while connecting battery • For towing a vehicle, the best leads : way is to use a wrecker. 1. Positive (+) of Good battery to •...
  • Page 57: Towing The Car

    INCASE OF EMERGENCY TOWING THE CAR Securing the towing hook: • Place the towing hook and wheel spanner back in the vehicle tool At Front : kit. • Provision for fitment of towing Transporting the vehicle : hook is provided on front bumper as indicated.
  • Page 58: Routine Service

    INCASE OF EMERGENCY ROUTINE SERVICE This manual will help you to Several maintenance procedures can understand your vehicle. Inspection, be done only by a qualified service maintenance of the vehicle should technician with special tools. be entrusted to the professionals Improper do it ourself maintenance only.
  • Page 59: Preliminary Trouble Shooting

    PRELIMINARY TROUBLE SHOOTING ENGINE These tips are given for your guidance. These preliminary checks can be carried out in an emergency. In normal cases the problems should be attended to in an Authorized Service outlet by following the repair procedures given in the Workshop Manual.
  • Page 60 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN ENGINE Low engine oil pressure Pressure transducer faulty, Do not run the engine indicator ‘ON’ when and / or oil pump faulty extensively. Take the car to engineis running even the nearest authorized though engine oil level service outlet &...
  • Page 61 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN BRAKES Brake pulling to one Oil on the brake lining Clean the brake lining. side One side shoe/ pad worn Get the shoe/ pad replaced on both wheels. Loose brake anchor plate Tighten the bolts.
  • Page 62 PRELIMINARY TROUBLE SHOOTING PROBLEM OBSERVED PROBLEM CAUSE ACTION TO BE TAKEN SUSPENSION Abnormal or excessive Tyre out of balance Check balance and/ or tyre wear adjust if required. Steering geometry disturbed Adjust steering geometry. Tyres not adequately inflated Adjust tyre pressure. Wobbly wheel or tyre Replace wheel or tyre.
  • Page 63: Electrical Maintenance

    ELECTRICAL MAINTENANCE FUSES & RELAYS Fuses and Relays : Your car’s electrical circuits have fuses to protect the wiring from short circuits or sustained overload. These are located below dash board on right hand side as shown in the sketch. •...
  • Page 64: Fuses & Relays Layout

    ELECTRICAL MAINTENANCE FUSES & RELAYS...
  • Page 65: Fuses Detalis

    ELECTRICAL MAINTENANCE FUSES & RELAYS Power consumer Models Rating Window Winding RH (Front Door) Compresser CXCX, LX Condenser Fan CX, LX Fog Lamp Horn, Roof Blower CX, LX Radio Battery Supply Power Socket / Cigar Lighter Window Winding LH (Front Door) Stop / Park Fuel Pump Radiator Fan...
  • Page 66: Bulb Specification

    ELECTRICAL MAINTENANCE BULB SPECIFICATIONS DESCRIPTION LOCATION CAP TYPE SPECIFICATION QTY Head lamp-Halogen H4 Head lamp P43t - 38 H4 12V,60/55 W Parking Lamp Front 12V, 5W Front Fog Lamp Front PK22s 12V, 55W Side Repeater Indicator Side 12V, 5W Rear Direction Indicator Tail Lamp BAU15s 12V,21W...
  • Page 67: Vehicle Care

    VEHICLE CARE CAR CARE CAR CARE : Polishes : Your Car is subjected to many Polishes and cleaners can restore external influences such as climate, shine to the painted surface that has road conditions, industrial pollution oxidised and become dull. They and proximity to the sea.
  • Page 68 VEHICLE CARE CAR CARE Cleaning of Windows, Front and Inflate the tyres to 0.5 kg/cm above Rear Glasses : the normal specified pressure and check it at regular intervals. Clean the windows inside and outside with commercially available Check the battery charge every six glass cleaners.
  • Page 69 VEHICLE CARE CAR CARE PROPER CLEANING : WASHING YOUR CAR : In order to protect your car from HAND WASH : corrosion it is recommended that you 1. Always wash your car in shade wash your car thoroughly and and the surface is at room frequently in case : temperature.
  • Page 70 VEHICLE CARE CAR CARE freshly tarred road, check WAXING : immediately afterwards for any Waxing polishing stains and clean them. recommended to maintain the 3. External contamination in the gloss and wet-look appearance of form of sap or industrial fall-out your paint finish.
  • Page 71 Cleaning and dressing of tyres, Bumpers and all exterior plas- tic moldings/trims. TATA MOTORS has tied up with M/s Opulent (Waxoyl brand) and M/s 3M for this world class treatment at affordable prices. This treatment is available in all authorized workshops.
  • Page 72: Maintenance

    MAINTENANCE BRAKE FLUID & WINDSHIELD WASHER RESERVOIR Open the front hood for Checking / WINDSHIELD WASHER : Topping up brake fluid & windshield washer fluid, (Refer page no. 37 for opening & closing of front hood.) BRAKE FLUID LEVEL : 1.
  • Page 73: Engine Compartment Cover

    OPENING & CLOSING OF ENGINE MAINTENANCE COMPARTMENT COVER Open the rear engine inspection REFITTING OF ENGINE compartment cover / lid for Checking COMPARTMENT COVER / Topping up engine oil, coolant level & Air filter element cleaning. OPENING ENGINE COMPARTMENT COVER : For opening engine compartment cover - 1) Place the cover &...
  • Page 74: Engine, Oil & Coolant

    MAINTENANCE ENGINE OIL & ENGINE COOLANT ENGINE OIL LEVEL Check the engine oil level if “low oil pressure” warning comes 'ON' while driving. Failure to check the oil level regularly could lead to serious trouble due to insufficient oil. ENGINE OIL TOPUP Remove the oil filler cap and pour oil slowly through the filler hole to bring the oil level to the upper limit on the...
  • Page 75: Air Filter & Spark Plug

    MAINTENANCE AIR FILTER & SPARK PLUG The air filter is located on the LH side NOTICE of the engine compartment. Check radiator fins for dirt/dust accumulation. Get it cleaned from a) When a vehicle is driven under authorised Tata Service Dealer if dusty conditions, frequent required.
  • Page 76: Tyre

    MAINTENANCE TYRES Tyres Under inflated tyres reduce your comfort in car handling and are prone Check for inflation and condition of to failures due to high temperature. your car tyres periodically. They also cause uneven wear and more fuel consumption. CAUTION Every time you check inflation pressure, you should also...
  • Page 77 MAINTENANCE REPAIRING TYRES Repairing a Tyre : inside the tyre. Removal of this layer due to scratching may Mark the tyre position (if original cause gradual loss of air and colour dot mark is not visible) with deflation. respect to valve stem hole to ensure that the tyre is refitted in the original 3.
  • Page 78: Wheel Alignment & Catalytic Converter

    WHEEL ALIGNMENT / BALANCING & MAINTENANCE CATALYTIC CONVERTER Wheel alignment : Care for the Catalytic Converter: Incorrect wheel alignment causes The catalytic Converter does not excessive and uneven tyre wear. require any special maintenance Check wheel alignment at specified however, following precaution intervals from our authorised should be taken for the effective dealers.
  • Page 79: Battery

    MAINTENANCE BATTERY Battery : Clean the battery terminals with a terminal cleaning tool or wire brush. Battery is located below driver seat Reconnect and tighten the cables, coat the terminals with petroleum jelly. Ensure that battery is securely mounted. If you need to connect the battery to a charger, disconnect both cables to prevent damage to the vehicle’s electrical system.
  • Page 80: Important Technical Information

    IMPORTANT TECHNICAL INFORMATION BELT TENSION BELT TENSION : clavis gauge ensure recommended values as given below Check the conditions of belts on the engine. Examine the edge of the belt Alternator Belt for cracks or fraying. Frequency should be checked in Check the tension of the belt by middle of lower span of belt.
  • Page 81: Fuel, Lubricants & Coolants

    FUEL, LUBRICANT & IMPORTANT TECHNICAL INFORMATION COOLANTS PLEASE USE ONLY FOLLOWING GENUINE OILS, COOLANTS , LUBRICANTS , ANTI RUST & SOUND DEADENING COATS, WINDSCREEN SEALANT, BRANDED BY TATA MOTORS FOR OPTIMUM PERFORMANCE OF YOUR CAR... ITEM SPECIFICATION COMPANY & BRAND...
  • Page 82 IMPORTANT TECHNICAL INFORMATION FUEL, LUBRICANT & COOLANTS FUEL : COOLANTS : Vehicles with catalytic converter : Presence of dirt in coolant chokes up passages in radiator, cylinder Unleaded regular grade petrol head and crankcase, thereby confirming to IS 2796/DIN 51607 (or causing overheating of engine.
  • Page 83: Oil Filling & Drain Points

    IMPORTANT TECHNICAL INFORMATION OIL FILLING & DRAIN POINTS Engine Oil Filling Cap : Engine Oil Drain Plug : Transaxle Oil Level Plug : Transaxle Oil Drain Plug : Transaxle Oil Filling Plug :...
  • Page 84: Technical Specification

    IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION 1. ENGINE Model : 273 MPFI (BS III) 273 MPFI (BS IV) Type : 4 Stroke, water cooled, multipoint fuel injection system, SOHC, 2V/Cylinder No. of Cylinders : 2 in-line Bore / Stroke : 73.5 mm x 73.5 mm. Capacity : 624 cc Max.
  • Page 85 IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION STEERING Type : Mechanical Rack & Pinion steering gear with steering column. Steering Wheel : 350 mm dia. Ratio : 16 : 1 BRAKES Type : Dual circuit, Vertical split type split hydraulic brake. Front Brakes : 180 mm dia.
  • Page 86 IMPORTANT TECHNICAL INFORMATION TECHNICAL SPECIFICATION 10. ELECTRICAL SYSTEMS System Voltage : 12 Volts -ve earth Battery : 12V, 25 AH Alternator : 12V, 70 A (with AC) Capacity 12V, 40 A (without AC) 11. PERFORMANCE Max. speed : 105 kmph Max.
  • Page 87: Dimensions

    IMPORTANT TECHNICAL INFORMATION DIMENSIONS MAIN CHASSIS DIMENSIONS (IN mm) Wheel Base : 2230 Track Front : 1325 Track Rear : 1315 Front Overhang : 464 Rear Overhang : 405 Overall Length : 3099 Max. Width : 1495 - Over body 1620 - Over ORVM Overall Height (Unladen / laden) : 1652 / 1613...
  • Page 88: Car Identification

    CAR IDENTIFICATION LOCATION OF AGGREGATE NUMBER Chassis Number Punching on Chassis Number Plate on RH Front door ‘B’ Piller Fire Compartment Transaxle Number Location Engine Number Location...
  • Page 89 SERVICE MAINTENANCE SCHEDULE OPERATION FREQUENCY GENERAL 1 Wash the vehicle & clean condenser fins Every Service 2 Check & top up fluids (if required) : Every Service Engineoil,Coolant,Brake fluid, Wind screen washer fluid. Adjust wind screen washer nozzles if required. 3 Check fuel lines &...
  • Page 90: Service Instructions

    Clear the DTCs Service Instructions : The Tata Nano has been manufactured to give you economical and trouble free performance. To achieve this please follow the instructions as stated. Your Car is entitled to Three free services (labour only). The free service coupons are attached to the sales invoice.
  • Page 91 RECORD OF SERVICE PERFORMED Recommended Servicing Repair Service Odometer Dealer's Sign. Order Date Reading KMs. & Stamp At km 1000 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 1,00,000 1,10,000 1,20,000 1,30,000 1,40,000 1.50,000 1,60,000 1,70,000...
  • Page 92 RECORD OF REPAIRS CARRIED OUT Chassis No.: SERVICING Odometer Repair DATE PARTICULARS OF REPAIR DEALER’S Reading Order SIGNATURE & STAMP...

Table of Contents