TATA Motors Zest Owner's Manual page 116

07
EMERGENCY & BREAK DOWN ASSISTANCE
• Insert the new bulb (without touch-
ing the glass) into the bulb holder.
• To lock the socket on headlamp
housing, rotate the front turn sig-
nal socket plug assembly clock-
wise until it fits properly.
Replacing turn indicator, reverse,
stop lamp :
• Lift the trunk lid to access the tail
lamp's mounting screws inside the
boot carpet.
• Slightly remove the boot carpet by
pulling out the plastic rivets. To
116
remove plastic rivets, first pull the
center pin and then rivet.
• Remove the tail lamp mounting
screws.
BULB REPLACEMENT
• Carefully slide out tail lamp assem-
bly to release the two mounting lugs
and tail lamp catcher provided as
shown in fig. Take out the tail lamp
assembly.
Tail lamp catcher
• Rotate the bulb holder in anti-clock
wise direction to unlock the bulb
holder.