Carpet Height Adjustment; Tools; Select Proper Tool; Remove Hose - Hoover UH72003 Owner's Manual

CarPeT HeIGHT aDJusTMenT*

2.4
IMPOrTanT
If the vacuum is difficult to push, turn knob to the
next higher setting.

3. TOOls

Tools allow for cleaning surfaces above
the floor and for reaching hard to clean
areas.
Brushroll continues to turn while product is turned on and
The vacuum is ready for tool use when handle is in upright position. To avoid damage to carpet, rugs,
handle is in upright position.
furniture and flooring, avoid tipping cleaner or setting it on
furniture, fringed area rugs, or carpeted stairs during tool use.

seleCT PrOPer TOOl

3.1
A* b* C

reMOVe HOse

3.2 To remove hose for
3.2
tool use, pull hose grip
out.
To put back into place,
push hose into hose
tube.
CauTIOn
! !
Not to be used for grooming a pet.
2.4 To adjust height setting, TURN knob (A) to
desired height setting.
For maximum cleaning performance, the following
A
carpet height settings are recommended:
· ScatterGuard Hard Floor Setting (B) for bare
floors. A retractable wiper helps capture dirt &
debris that normally gets left behind for an enhanced
bare floor cleaning.
· Low Setting (1): for all types of carpet.
b · Higher settings: for very deep pile carpet, where
easier pushing effort is desired, while maintaining
good cleaning performance.
*Number of height settings vary per model.
IMPOrTanT
A. Turbo Tool* may be used for upholstered
furniture, draperies, mattresses, clothing, and
carpeted stairs.
B. Use Dusting Tool* to clean upholstered
furniture, draperies, mattresses, clothing, and
carpeted stairs.
C. Crevice Tool may be used in tight spaces,
corners and along edges in such places as dresser
drawers, upholstered furniture,
baseboards.
*Tools may vary per model.

aTTaCH wanD anD TOOls

warnInG
!
Unplug vacuum before connecting the Turbo Tool.
3.3 To attach tools to
3.3
hose, push firmly into
place.
7 Actual model may vary from images shown.
stairs and
!