Vacuum Assembly; Carton Contents; Attach Back Panel; Attach Handle - Hoover UH72003 Owner's Manual

1. VaCuuM asseMBlY

CarTOn COnTenTs

1.1
A. Back Panel
B. Dirt Cup
C. Handle
D. Nozzle
E. Turbo Tool*
F. Crevice Tool
G. Dusting Brush*
H. Hose
I. (1) Handle Screw
(2) Back Panel Screws
*Varies per model.
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.

aTTaCH BaCK Panel

1.2 Insert back panel into nozzle base. Push
down firmly. Using a Phillips screwdriver, fasten (2)
screws (A) into back panel.

aTTaCH HanDle

1.3 Insert handle section into back panel. Push
down firmly. Using a Phillips screwdriver, fasten (1)
large screw (B) behind handle into back panel.

aTTaCH DIrT CuP

1.4 Place bottom of dirt cup into vacuum body first.
Pivot cup into vacuum. Dirt cup is secure when you
hear a click.

aTTaCH TOOls

1.5 Attach bottom of Turbo Tool into base of
handle and pivot up until secure.
1.6 Attach dusting tool (C) and crevice tool
(D) to back of vacuum as shown.
b C D
A
F G* H
1.3
1.2
A A
1.4
1.6
1.5
C
D
5 Actual model may vary from images shown.
E*
I
b