[Backspace]: Initiate Destructive Memory Test - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual

[BACKSPACE]: Initiate Destructive Memory Test

Table 17 Initiate Destructive Memory Test
Display
1. (Application Prompt)
(or)
DOWNLOAD NEEDED
2. SYSTEM PASSWORD?
3. SYSTEM= (firmware ID)
4. MEMORY TEST
MEM WILL BE LOST
PRESS FUNC IF OK
56
In System Mode, press [0] to initiate a destructive test of the
terminal's application memory (RAM).
Caution: This function deletes all data and files currently stored in
the terminal's application memory, including protected CONFIG.SYS
records. (Protected records have search keys that begin with an
asterisk (*) or a pound sign (#), such as *ZA.) Do not perform this
procedure if you do not have a way to download a valid application
program into the terminal's memory after the test is completed!
To enter System Mode, press [FUNC/ENTER] and [7]
simultaneously.
Key in the current System Password and press [FUNC/
ENTER].
Press [BACKSPACE] to initiate the destructive
memory test.
Three prompts are displayed to warn you that a
destructive memory test has been initiated, and to
inform you that the contents of the RAM will be lost if
you proceed with the test.
Press [FUNC/ENTER] to proceed with the test.
To end the test procedure and return to the System
Prompt prompt, press any key other than [FUNC/
ENTER].
Action
Local and Remote Functions