System Mode Procedure Descriptions - VeriFone Omni 3200 Reference Manual

Omni 3200 Reference Manual

System Mode Procedure Descriptions

32
The procedure descriptions provided below explain how to perform
each of the System Mode functions listed in Table 3. Each procedure
takes you step-by-step through a complete System Mode operation in
the following sequence:
1. Enter System Mode,
2. Key in the System Password,
3. When the System Prompt is displayed, select an operation by
pressing the appropriate key,
4. Complete the operation, and
5. Return to the System Prompt.
Note: Before you proceed to enter System Mode and select the
function(s) you want to perform, please verify that you have
completely installed the Omni 3200, as described in Section 1 of this
manual, and that the terminal is connected to a power source.
Procedure descriptions are arranged in a two-column, tabular format:
Display
The left-hand column, with the heading "Display," indicates what
appears on the terminal display at each step of the procedure. Please
note the following conventions that are used in the Display column:
• If a prompt or message appears on the screen exactly as it is
described, it is shown in the Display column in the
in ALL CAPS . For example,
• If text in the Display column is enclosed in parentheses, it means
that the actual text or message may vary depending on the
terminal version you have. For example, (Application Prompt). In
this case, the normal font is used, and text is typed in Initial Caps.
Action
DOWNLOAD NEEDED
System Mode Procedure Descriptions
font, and
Ariel
.