Table of Contents
Advertisement
Configuring the handset
Please note
u The QuickDial number changes if you change the corresponding number in the directory.
u If you delete the number assigned to the QuickDial shortcut from the directory, the QuickDial
icon is deleted from the configurable page without prompting.
Changing the display language
¤
¤
In the Settings menu (
'
Touch
next to Display Language.
'
with
.
Configuring the keyboard/keypad
You can change the appearance and behaviour of the keypad shown in the display. The settings do
not correspond to the handset keys (
¤
In the Settings menu (
configure the following:
u Key Tones: Every time you touch a number, a confirmation tone is audible.
u Key Vibration: Every time you touch a number on the keypad, the handset vibrates.
u Keypad with R/P: With R you can insert a line interruption (recall), with P a dialling pause. You can
insert a "P" by pressing and holding the
u Keypad w. Letters: For dialling with letters – sometimes used for entering service numbers, for
example.
¤
You can use the button on the right to activate or deactivate the relevant function directly.
Setting the display
Setting the screensaver/slide show
In idle status, you can display a screen saver (default setting: Off). The screensaver replaces the dis-
play screen when the handset is in idle status. To display the idle display again, briefly press
display.
¤
In the Settings menu (
¤
Activate/deactivate the screensaver via the right button.
screensaver/slide show.
Setting the display backlight
You can specify a particular period in idle status after which the display backlight should switch off.
If it does not switch off, the display is permanently dimmed.
The display backlight switches itself on as soon as the handset is moved.
¤
In the Settings menu (
¤
Using the right button, activate/deactivate the display backlight in the charger or outside the
¤
charger.
'
Touch the
Please note
The handset's standby time can be significantly reduced if the display backlight is activated.
Activating/deactivating auto answer
In the case of auto answer, the handset accepts an incoming call as soon as you take it from the
charger. In the same way, the connection ends when you place it in the charger.
¤
In the Settings menu (
with the button to the right of Auto Answer.
34
¢
page 13), touch [
c v a
¢
page 13), touch [
¢
page 13), touch [
¤
‰
Touch [
¢
page 13), touch [
next to Backlight Timeout. Select the off time.
¢
page 13), touch [
°
Language and Location].
¤
Ø
Select language (
= selected).
).
g
Display and Keypad].
:
key and an "R" by pressing and holding the
g
Display and Keypad].
¤
Select].
g
Display and Keypad].
«
Telephony].
¤
Confirm with
¤
Scroll to Keypad. You can
'
Touch
next to Selection. Select
¤
Activate/deactivate the function
¤
è
.
Back
;
key.
a
or the
Advertisement
Table of Contents
